TPS2818DBVRG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

PMIC – Gate Drivers, such as the TPS2818DBVRG4, are used to ensure the reliability of power supply circuits and the safe operation of electrical equipment. This specific product is a one-chip, 3.3V MOSFET power switch driver capable of performing with a high-efficiency, bi-directional, series-control control configuration. Equipped with several features and functions, the TPS2818DBVRG4 is suitable for use in a variety of applications in the industry. This article will discuss the application fields and working principles of the TPS2818DBVRG4.

Application of TPS2818DBVRG4

The TPS2818DBVRG4 is produced for use in a variety of applications, but some of its primary use cases include:

• Power Limited Switches
• Power Distribution Controllers
• Low Current Protection
• Battery Backup Units
• High-Voltage/High-Power Switching
• AC/DC Power Supplies
• Power Sensor Applications
• Power Converters
• Motor Control
• Full-Reel Production

In these applications, the TPS2818DBVRG4 exhibits high power efficiency and operational stability even in a variety of temperatures and conditions. Additionally, the driver is designed to reduce the fast fall-time, or “ringing”, of power FETs, minimize capacitive switching losses, and provide a quieter operation.

Working Principle of TPS2818DBVRG4

The TPS2818DBVRG4 is a 3.3V MOSFET power switch driver, which operates by drawing current from an input voltage source and providing a high and low output when connected. The driver pulls the MOSFETs gate to the same level as the voltage source in order to turn the MOSFET “on” and apply a logic-level output, then to turn the MOSFET back “off” and provide a logic-level open output.

The driver features a wide variety of features, including low power consumption, low RDS(on), excellent transient response and quiescent output current stability. Additionally, the device is equipped with two high-current, external resistors to provide the required pull-up and pull-down gate resistance, allowing for high efficiency and better conduction on power turning-off.

Other features of the device include a soft-start mode, operating frequency up to 2.5MHz, and a selectable dead-time which can be adjusted as high as 20 µs for slow/fast switching in either direction. Additionally, the device provides the capability of independent control of both rising and falling edges of the MOSFETs gate by either keeping both transitions synchronized or allowing them to be independently adjusted.

To summarize, the TPS2818DBVRG4 is a 3.3V MOSFET gate driver built for a variety of applications, such as power limited switches, power distribution controllers, low current protection, and high-voltage/high-power switching. Its primary features are low power consumption, high efficiency, soft-start mode, and selectable dead-time. The device is also equipped with two external resistors to ensure better conduction on power turning-off.

The specific data is subject to PDF, and the above content is for reference