TPS73233DCQG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TPS73233DCQG4 voltage regulator belongs to the Linear Voltage Regulators PMIC. It is a 3.3V, low-dropout (LDO) linear voltage regulator featuring very low-noise performance and ultra-low power consumption. It is designed specifically to provide very low-noise and extremely low currents during shut-down, making it ideal for power management applications in portable electronic devices requiring both low-noise and low power operation.

The TPS73233DCQG4 operates from a supply voltage of 1.4V to 5.5V and provides a fixed output voltage of 3.3V. It features a current limiting circuit, thermal shutdown protection, and a logic-controlled enable pin to turn the output on or off. It has an internally compensated error amplifier, band-gap reference, and series pass regulator. The current limiting circuit forces the output current to drop during overload conditions or when excessively high output voltage is requested. In addition, the thermal shutdown circuit works to protect the device from catastrophic failure under extreme overload conditions.

The TPS73233DCQG4 is designed to optimize power management in portable electronic devices. It offers high PSRR (Power Supply Rejection Ratio) performance at low frequencies, which eliminates noise gain and keeps output voltage clean. Its ultra-low quiescent current is achieved by going into low-power shutdown mode when the enable pin is pulled low, making it an ideal voltage regulator for portable and hand-held devices that require low-power operation. This ultra-low quiescent current and low noise also makes the TPS73233DCQG4 suitable for battery-powered applications, where long battery life is essential.

The TPS73233DCQG4 is ideal for a variety of applications, including cellular phones, digital cameras, MP3 players and other portable devices, set-top boxes, PDAs, and medical instruments. Its small SOT-23 and SOT-223 packages also make it suitable for space-constrained designs. It is available in a variety of packages, including a new chip-scale package (CSP) available on tape-and-reel.

The operating principles of the TPS73233DCQG4 can be broken down into four main steps. First, a voltage reference circuit consisting of a resistor and Band-Gap reference will provide a stable voltage reference. Secondly, a comparator will compare this reference voltage to the output voltage, and an error signal will be generated. This signal is then filtered, amplified, and sent to the driver stage. Finally, the driver stage will regulate the amount of current flowing through the output transistors to adjust the output voltage.

The TPS73233DCQG4 voltage regulator is a powerful, low-noise, low-power device suitable for high performance power management applications. Its high PSRR performance at low frequencies, small package sizes, and ultra-low quiescent current make it ideal for any energy-sensitive system. With its wide operating voltage range and current limiting circuit, the TPS73233DCQG4 provides superior current overload protection and eliminates the need for additional protection circuits. It can also operate in shutdown mode to save power, making it a reliable voltage regulator solution for any power-sensitive application.

The specific data is subject to PDF, and the above content is for reference