TS5A3153DCURG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The TS5A3153DCURG4 is an analog switch, multiplexer, or demultiplexer that forms part of the Texas Instruments Switch Portfolio. The device is a grade of devices, with a low Off-state leakage current and lower On-state resistance (RON). This device has a single supply voltage of 2.7V to 5.5V.

The TS5A3153DCURG4 use CMOS technology and has a maximum channel number of three that allows a maximum of four independent switches to be enabled simultaneously. The CMOS devices are ideal for low-power and low-voltage applications because of their low power consumption and low operating voltage. This makes them ideal for applications such as portable and handheld systems.

The TS5A3153DCURG4 are available in three versions, the M0905 package with a refresh time of 32.5ns, the M0906 package with a refresh time of 48.5ns, and the M0907 package with a refresh time of 64.5ns. The three versions are available in either a surface-mount version or through-hole version.

The TS5A3153DCURG4 offers many features, including single/multiple mode selection, logic-controlled enable/disable and logic-controlled active/inactive configuration. The device also has a high input impedance and does not require any external pullup/pulldown resistors for active-low enable/disable control.

The application field of the TS5A3153DCURG4 is mainly applicable to switch assets such as general test and measurement systems, power subsystems, digital multi-meters, and industrial control systems. The TS5A3153DCURG4 can also be used for applications such as power supply/power connector switching, switchcard designs, sensor switching, data and address bus multiplexing, as well as gain and bandwidth control.

The working principle of the TS5A3153DCURG4 is based on an analog switch’s design, meaning it is capable of switching between two or more data signals or paths. When the control signals are applied to the ‘A’ and ‘B’ inputs and the enable pin is connected to the voltage source, the device acts as a multiplexer and the ‘A’ output is connected to the ‘C’ output. When the enable pin is connected to ground, the device acts as a demultiplexer and the ‘A’ output is disconnected from the ‘C’ output. The enable pin requires a logic-low signal to enable the multiplexing/demultiplexing function.

The TS5A3153DCURG4 is a highly efficient and cost-effective analog switch, multiplexer, or demultiplexer for low-power and low-voltage applications. This device offers excellent On/Off switching performance, low power consumption, high input impedance, and logic-controlled enable/disable and active/inactive configuration.

The specific data is subject to PDF, and the above content is for reference