TS862IPT Integrated Circuits (ICs)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Linear comparators are typically used to compare two magnitudes and output a logic \'1\' when the input magnitude is greater than the reference magnitude. Thus, linear comparators are basically very simple analog circuits which compare two input voltages and indicate if one of the voltages is higher than the other. The TS862IPT is a two accurate external access comparator with an input range of 0.2V and a large output current of 6mA. It is designed to provide accurate comparison of power supply and battery voltages, without the need of an extra external reference.

The TS862IPT features low current drain, a wide range of power supply (1V to 20V) and can be used in a wide variety of applications in fields such as power management, communications and industrial control. For example, in power management, it can be used to detect over-voltage or under-voltage conditions, providing a means of preventing or correcting power problems. In communications, it can be used to detect signal levels or as a part of switching and routing systems. In industrial control, it can be used as a part of an automated monitoring system that can detect faults or out of tolerance conditions, allowing for corrective action to be taken promptly.

The working principle of the TS862IPT can be explained using an example, such as a voltage detector circuit using two TS862IPT comparators. The aim is to detect a set voltage (nominally 5V) with a certain level of accuracy. When hooked up, the input source is connected to one input of the comparator (IN1), and a reference voltage is connected to the other input (IN2). Using trim pots and reference adjustment circuits, a more accurate reference voltage can be set. The output of the comparator is then connected to a logic circuit, which is set up to indicate an "over-voltage" condition when the voltage of IN1 is higher than that of IN2.

In this setup, when the input source is below a certain level, the output of the comparator is at logic ‘0’, indicating that the input voltage is lower than the reference. Conversely, when the input source is above the reference, the output of the comparator is at logic ‘1’, indicating that the input voltage has exceeded the reference. The comparator is designed to be highly responsive and therefore capable of detecting small voltage changes accurately.

The TS862IPT comparator can be used in many other applications, such as calculating the angle of a motor or measuring capacitance or power supply levels. It is also suitable for use in other low-voltage detection applications. The TS862IPT\'s large output current capability also allows it to drive large loads directly, thus providing a reliable solution for applications requiring a fast response time.

In summary, the TS862IPT is a two accurate external access comparator with a wide range of applications in fields such as power management, communications, and industrial control. It features low current drain, a wide range of power supply and is a reliable solution for applications requiring a fast response time. The working principle of the TS862IPT can be explained through an example of a voltage detector circuit, for which it is capable of detecting small voltage changes accurately.

The specific data is subject to PDF, and the above content is for reference