TS864IN

Current - Output (Typ):	--
Base Part Number:	TS864
Supplier Device Package:	14-DIP
Mounting Type:	Through Hole
Package / Case:	14-DIP (0.300", 7.62mm)
Operating Temperature:	-40°C ~ 85°C
Hysteresis:	--
Propagation Delay (Max):	2µs
CMRR, PSRR (Typ):	70dB CMRR
Current - Quiescent (Max):	16µA
Series:	--
Current - Input Bias (Max):	300pA @ 5V
Voltage - Input Offset (Max):	15mV @ 5V
Voltage - Supply, Single/Dual (±):	2.7 V ~ 10 V
Output Type:	Push-Pull
Number of Elements:	4
Type:	General Purpose
Part Status:	Obsolete
Packaging:	Tube

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Linear - Comparators

TS864IN Application Field and Working Principle

The TS864IN is a linear comparator that is often used in medium-power applications. It is capable of working with both single-ended and differential inputs. This application field and working principle of the TS864IN will be discussed in further detail in this article.The TS864IN linear comparator is a medium-power linear comparator that is used in a variety of applications. It is commonly used for the following applications:• Automotive: This comparator can be used for applications such as engine control and airbag safety systems.• Control and power systems: This comparator can be used for applications such as motor control, power rating monitoring, and over/under voltage protection.• Electrical and medical instrumentation: This comparator can be used for applications such as medical diagnostics, temperature controllers, and measurement systems.The TS864IN is a high-speed operational amplifier with a bandwidth of 5MHz and a very low offset voltage of 15mV. It has a low input bias current of 7nA and a low input capacitance of 5pF. It can operate from a single-ended or differential input. The TS864IN works using an open collector output configuration. This allows the comparator to provide an output voltage VOH, or a high voltage, when the output is in an active state, and to provide a low voltage, VOL, when the output is in an inactive state. The output voltage VOH is typically set at +5V, while the output voltage VOL is set to 0V. The TS864IN has two main operating modes. The single-ended mode is used when only a single input is used, while the differential mode is used when two inputs are used. In the single-ended mode, the comparator compares the single input voltage to a fixed reference voltage, called the threshold voltage VTH. If the input voltage is above the threshold voltage, the comparator will output a logic high at the output pin. If the input voltage is below the threshold voltage, the comparator will output a logic low at the output pin. In the differential mode, the TS864IN compares the two input voltages to each other. If the first input voltage is higher than the second input voltage, the comparator will output a logic high at the output pin. If the first input voltage is lower than the second input voltage, the comparator will output a logic low at the output pin. The TS864IN also provides adjustable hysteresis, or a voltage offset between the output voltage and the input voltage, to ensure that the output of the comparator is stable. This is accomplished by adjusting the hysteresis or offset voltage VHYST. In conclusion, the TS864IN is a medium-power linear comparator that is used in a variety of applications. It is capable of working with both single-ended and differential inputs, and provides adjustable hysteresis. This makes the TS864IN an ideal solution for medium-power applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description