TSC5303DCP ROG

Introduction

The TSC5303DCP ROG (resistance-to-off ground) is a single bipolar transistor (BJT) of the switching type. It is used in a variety of applications, mostly in the automotive industry, and is often used in the design of computerized motor controls. This article will discuss the application field and working principle of the TSC5303DCP ROG in greater detail.

Application Field

The TSC5303DCP ROG is used in a variety of applications, most commonly in motor controls and power supplies. In the automotive industry, it is often used in the design of onboard computers for adjust the engine performance, such as the ignition timing of the engines. It is also used in the power supplies of consumer electronics products, such as laptops, personal computers and televisions.

Working Principle

The TSC5303DCP ROG is a NPN transistor, meaning that it is built with a semiconductor material which creates an electrical current when a voltage is applied. The transistor is made of three regions of a semiconductor material, a base, an emitter and a collector. The base region of the transistor is controlled by transistors, and the other two regions, emitter and collector, are connected to separate points in the circuit. The collector region serves as the output, while the emitter region serves as the input.When a current is applied to the base, a voltage is created between the collector and the emitter, allowing current to flow from the emitter to the collector. This current is known as the collector-emitter current. The amount of current that can flow between collector and emitter is known as the current gain. The TSC5303DCP ROG has a high current-gain of 500. When the base is forward-biased with a voltage, the transistor is said to be in ‘on’ state and the collector-emitter current is switched on. This is usually referred to as the ‘saturation region’.

Conclusion

In conclusion, the TSC5303DCP ROG is a single bipolar transistor which is widely used in a variety of applications, mostly in the automotive industry. It is used in the design of computerized motor controls, as well as in the power supplies of consumer electronics products. It is a NPN transistor with a high current gain of 500. When a voltage is applied to its base, the collector-emitter current is switched on, thus allowing it to be used in power supplies and motor controls.

TSC5302DCHC5G	Taiwan Semic...	0.14 $	1000	TRANSISTOR, NPN, 400V, 2A...
TSC5302DCP ROG	Taiwan Semic...	0.14 $	1000	TRANSISTOR, NPN, 400V, 2A...
TSC5303DCHC5G	Taiwan Semic...	0.15 $	1000	TRANSISTOR, NPN, 400V, 3A...
TSC5303DCP ROG	Taiwan Semic...	0.16 $	1000	TRANSISTOR, NPN, 400V, 3A...
TSC5802DCHC5G	Taiwan Semic...	0.16 $	1000	TRANSISTOR, NPN, 450V, 2....
TSC5802DCP ROG	Taiwan Semic...	0.16 $	1000	TRANSISTOR, NPN, 450V, 2....
TSC5304EDCP ROG	Taiwan Semic...	0.18 $	1000	TRANSISTOR, NPN, 400V, 4A...
TSC5304EDCHC5G	Taiwan Semic...	0.18 $	1000	TRANSISTOR, NPN, 400V, 4A...
TSC5804DCHC5G	Taiwan Semic...	0.19 $	1000	TRANSISTOR, NPN, 450V, 5A...
TSC5804DCP ROG	Taiwan Semic...	0.2 $	1000	TRANSISTOR, NPN, 450V, 5A...
TSC50	Eaton	39.87 $	1000	FUSE 50AMP 1200V AC TRACT...