TZMC1V0-GS18

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes, in general, are electronic components that use an asymmetrical-PN junction to conduct electricity. By controlling the bias and current, they can serve as rectifiers, filters, and even amplifiers. Zener diodes, in particular, use a PN junction to regulate the voltage on both sides of the diode. They are often used in power conditioning and voltage regulation applications, such as preventing rapid fluctuations or surges in voltage. The TZMC1V0-GS18 is a type of Zener single diode.

The TZMC1V0-GS18 has a maximum reverse voltage of 18V and a maximum forward current of 200mA. It is made from a generic silicon diode, giving it a low leakage current of 3μA.The diode also has a very high breakdown voltage at 25V, which makes it suitable for use in power electronics applications.

The primary application of the TZMC1V0-GS18 is voltage regulation and protection. As the name implies, it can be used to regulate the voltage between two different points in a circuit. This is done by allowing a greater amount of current to pass in one direction than the other. Because of its high breakdown voltage, it can also be used to protect circuits from surges or sudden spikes in voltage. This is usually done by having the diode breakdown, which shorts the circuit, thus preventing it from being damaged.Finally, the TZMC1V0-GS18 can also be used in filtering applications, as the voltage regulation helps to reduce any unwanted noise or interference.

The working principle of the TZMC1V0-GS18 is simple. It uses the asymmetrical PN junction of the diode to regulate voltage and allow current to flow in one direction. The breakdown voltage of the diode is what controls how much current passes in either direction. It is also responsible for protecting circuits from sudden spikes or surges of voltage. Finally, the filtering process is also dependent on the breakdown voltage, as higher voltages mean that there is more noise to be filtered out.

In conclusion, The TZMC1V0-GS18 is a type of Zener diode that is primarily used in voltage regulation and protection applications. It is made from a generic silicon diode and has a maximum reverse voltage of 18 volts and a maximum forward current of 200mA. The diode also has a high breakdown voltage of 25V, making it suitable for power electronics applications. It works by allowing current to flow in one direction more than the other and also by protecting circuits from surges and sudden spikes in voltage.

The specific data is subject to PDF, and the above content is for reference