TZMC9V1-M-18

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are common electrical components found in numerous systems and applications, ranging from basic power supplies, to digital systems and radio communications. The TZMC9V1-M-18 is a single Zener diode, a special type of diode used for voltage regulation and the prevention of overvoltage. This article will discuss the application field and workings of the TZMC9V1-M-18 Zener diode.

A Zener diode is a diode that is designed to have a very low reverse breakdown voltage, typically in the region of 3-30 volts depending on the device. This is achieved through the application of a made barrier layer inside the diode that is designed to break down when the reverse voltage is sufficiently high. This breakdown usually occurs at a specific voltage, and because of this ability to control the breakdown voltage, Zener diodes are used for a variety of applications requiring voltage regulation.

The most common application for a Zener diode is to regulate voltage. For example, a regulator circuit might use a Zener diode to ensure that a supply voltage remains at a certain level - above the Zener voltage but below the breakdown voltage - by sourcing or sinking current as needed. Zener diodes are also commonly used as protective components, limiting the voltage of a circuit by preventing it from exceeding the Zener breakdown voltage. This is important in digital electronics, as most components will be destroyed if allowed to get too high of a voltage.

The TZMC9V1-M-18 is a single Zener diode, meaning that it consists of a single P-N junction. It has a rated forward voltage of 9V and a maximum power dissipation of 1W. Additionally, it has a maximum reverse breakdown voltage of 18V and a maximum clamping voltage of 26V. It is also rated for standard temperature usage, meaning it can handle temperatures from -25C to + 85C. This makes it suitable for a range of applications, such as protect circuits, overvoltage protection, and voltage regulation.

The working principle of a Zener diode is straightforward. When a reverse voltage is applied to it, the Zener diode will act as a resistor, and then when the voltage reaches the Zener voltage, it will stop acting as a resistor and become a conductor. This causes the current to spike and has the effect of clamping the voltage, preventing it from rising above the Zener voltage. In a regulator circuit, the Zener diode works in concert with other components to maintain the voltage at a predetermined level.

In summary, the TZMC9V1-M-18 Zener diode is a single diode with a rated forward voltage of 9V, a maximum power dissipation of 1W, a maximum reverse breakdown voltage of 18V, a maximum clamping voltage of 26V, and temperatures from -25C to + 85C. It is often used for protection circuits, overvoltage protection, and voltage regulation. Its working principle involves clamping the voltage to the Zener voltage, preventing it from rising above the specified level in a regulator circuit.

The specific data is subject to PDF, and the above content is for reference