TZX3V9B-TAP

Diodes - Zener - Single

TZX3V9B-TAP is a single zener diode with a wide range of applications. It has an anode anode-cathode voltage tolerance of 3.2 V and a reverse current rating of 15.0 V. It is commonly used in a wide range of circuits, such as an amplifier, a linear regulator, or a flyback diode. This diode can also be used in parallel or serial configurations to meet a variety of ac and dc load requirements.

The TZX3V9B-TAP is a three terminal zener diode with a 3.2 volt zener voltage tolerance. It is designed to maintain a constant voltage level, allowing for a consistent current flow with minimal voltage variation. The device is designed to dissipate power with a maximum power rating of 600 mW. This power rating is suitable for a wide range of diode applications.

The diode also has an open circuit voltage of 3.2 V and a breakdown voltage of 15.0 V. The breakdown voltage is the point at which the device turns on and starts conducting current. The open circuit voltage is the voltage across the zener diode when there is no current flow. Both of these voltages are important when designing circuits.

Application & Working Principle

The TZX3V9B-TAP can be used in a variety of applications including amplifiers, linear regulators, and flyback diodes. The diode can be configured in both parallel and serial configurations to meet a variety of ac and dc load requirements. The device can also be used as a voltage regulator providing a constant voltage output with minimal voltage variation. This can help to reduce power usage and make more efficient systems.

The working principle of the TZX3V9B-TAP is relatively simple. It works on the principle that electricity will always follow the path of least resistance. When electricity is provided to the diode, it will only flow through the diode if the voltage across the diode is greater than the breakdown voltage. If the voltage across the diode is below the breakdown voltage, the diode will not conduct and no current will flow. By properly controlling the voltage across the diode, the device can be used as a voltage regulator or a flyback diode.

The TZX3V9B-TAP is a single zener diode with a wide range of applications. It is suitable for both ac and dc loads with a maximum power rating of 600 mW. With an anode-cathode voltage tolerance of 3.2 V and a reverse current rating of 15.0 V the device is designed to provide a consistent voltage output with minimal voltage variation. The diode can be configured in both parallel and serial configurations to provide more flexibility to the circuit.