UBW2A470MPD

Aluminum electrolytic capacitors are electrical components which store energy for discharge when needed. They are used for applications where short-term high electrical energy is required. The UBW2A470MPD is a high performance, long-life radial leaded aluminum electrolytic capacitor. This capacitor is primarily used for positive switching supplies, output and intermediate filtering in electronic equipment, and for motor starting and running applications.The UBW2A470MPD is constructed from a polarized aluminum electrolytic capacitor that has two plates just like a conventional capacitor. The two plates are separated by a layer of oxide-coated anode foil or metalized electrodes with a paper separator in between. The two plates contain electrolytic media, which are composed of different salts, acids and carbon. This media is electrically conductive and has an insulating film on the surface. The media is also called ‘electrolyte’, which is the liquid that allows the electrons to flow freely between the plates allowing for the capacitance to exist.The working principle of the UBW2A470MPD is quite simple. It is based on the alternating electrical current that is applied to the electrodes in the capacitor. The alternating current grows and collapses the electrical field between the electrodes, as it passes. This causes a constant redistribution of electrical charge between the two electrodes. The amount of charge stored in the capacitor depends on the voltage of the electrical current that is applied and the amount of capacitance in the capacitor.When the UBW2A470MPD is used in electronic applications, the current is stored in the capacitor and then used as it is needed. When the current is needed, the capacitor acts as a source, quickly delivering the current required for the application. This form of electrical storage is highly efficient, and it allows for quick electric transfer when compared to batteries or other slower electric sources. The UBW2A470MPD is a long-life capacitor, designed to resist high-temperature and voltage fluctuations. It is rated to operate from temperatures between -40 degrees Celsius and 85 degrees Celsius and can handle up to 10,000 volts. The UBW2A470MPD capacitor also has a low dissipation factor of 0.1%. This the capacitor can hold current over longer periods of time without significant loss of power.In conclusion, the UBW2A470MPD is a high performance, long-life radial leaded aluminum electrolytic capacitor designed for high-temperature and voltage applications. It is an efficient form of electrical storage for quick electrical transfer when large amounts of current are needed. The capacitor has a low dissipation factor of 0.1% and is rated to operate in temperatures between -40 degrees Celsius and 85 degrees Celsius.