UC2572DG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

UC2572DG4 Application Field and Working Principle

UC2572DG4 belongs to the family of Programmable Mixed-Mode DC to DC Switching Controllers, a type of voltage regulator. Specifically, its application field is in controlling the power output of charge pumps and other DC/DC converter applications. This controlling action is possibly implemented by complete regulation of one output parameter, or a combination of two output parameters.

The UC2572DG4 is suitable to be used in different applications, such as low-voltage dual output applications where one output voltage is set greater than the other. It comes with features such as soft start, burst-mode operation, wide input voltage range options, and input current limiting. This part is also suitable for applications subject to rigorous environmental conditions and has been tested to meet the requirements laid out in the JESD-785 and JESD-78 standards.

Operating as a voltage regulator this device works in a way that it employs topology control to ensure an output voltage is regulated within certain limits. To identify the input and output operating parameters, a user needs to apply testing such as voltage and current measurements to the device before and during operation. The UC2572DG4 is provided with an external reference and synchronization circuit. The output can be programmed for a particular voltage value for the “Vref” pin, meaning that the reference voltage can be adjusted with a different voltage reference. This in turn; applied to be used for any low-voltage DC/DC application.

Working Principle

The working principle of the UC2572DG4 involves determining the correct output voltage, current and operating frequency at which the IC operates. For example, the maximum input voltage related to current and the output voltage to be generated through the IC. This regulation is achieved by means of synchronous rectification and self-oscillation. Essentially, there is a need to maintain the voltage oscillations between the input and output stages. A lack of appropriate frequency may affect the stability of the output voltage.

The oscillation cycle is approximately determined by the device’s external components. These components typically include capacitors, resistors and inductors. The resistors and capacitors form a charging and discharging circuit where the current is passed from the input, through the capacitors, and into an inductor. This, in turn, allows for the change in voltage across it. In the oscillation, the switch is then opened and closed to determine the output voltage regulation, with the frequency of oscillation being determined by the time interval of the switch opening and closing, controlled by the self-oscillating control cycle. This switch also serves to protect the device from overloading when the current exceeds the programmed current limit. This allows for circuit protection and allows the device to run optimally and prevent overloading.

Conclusion

The UC2572DG4 is a type of DC/DC converter belonging to the family of Programmable Mixed-Mode DC to DC Switching Controllers. It is designed to be used to control the power output of charge pumps and other DC/DC converter applications by complete regulation of one output parameter, or a combination of two output parameters. The device is also suitable for applications subject to rigorous environmental conditions and has been tested to meet the requirements laid out in the JESD-785 and JESD-78 standards. The working principle involves the oscillation and switching of the device to regulate the output voltage, and to protect the device from overloading.

The specific data is subject to PDF, and the above content is for reference