UC3827N-1G4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The UC3827N-1G4 is part of the Texas Instruments family of switch-mode controller integrated circuits. It falls into the Power Management, Integrated Circuits (PMIC), Voltage Regulators, DC DC Switching Controllers category. This device is an often-used choice for providing optimal control for step-down and step-up DC/DC switching power conversion. With this device, circuit designers can implement highly efficient and compact DC/DC converter systems.

The UC3827N-1G4 is a single chip control IC, and is designed to operate with the current drive pulses in hard switching mode. It generates the drive signals for a synchronous rectifying buck converter or a boost converter. These types of converters are typically used in isolated supplies, where input and output voltages are different and power density is a major factor.

The UC3827N-1G4 consists of an oscillator, error amplifier, and seven driver outputs, integrated into a single package. The outputs of the UC3827N-1G4 are used to drive external power MOSFETs or IGBTs, as well as additional driver devices and catch diodes, which are required to accomplish the hard-switching based DC/DC power conversion.

The error amplifier compares the difference between the output voltage and a controlled fixed reference voltage, in order to provide the right amount of drive signals for the power switches. This ensures the regulation of the load, and the tight control loop ensures that the output voltage remains constant despite variations in input voltage and load current.

The oscillator frequency is set by a resistor and capacitance connected between an external clock pin, and the oscillator timing capacitor is connected between an external clock pin and ground. The oscillator frequency adjusts the frequency at which the power converters switch. As the output current increases, the oscillator frequency adjusts automatically to compensate.

The UC3827N-1G4 can be used in applications that require fixed switching frequencies, as well as in applications that require adjustable frequenciers. The adjustable frequency can be changed by changing the values of the external components connected to the oscillator.

The UC3827N-1G4 is designed to accept an input voltage range of up to 24V, and is capable of operating at switching frequencies up to 1 MHz. It also features an advanced shutdown control and thermal protection, diode emulation, short circuit protection, current limit, and load sharing control. These features provide superior protection and reliability in the event of an overload.

The UC3827N-1G4 can be used in a comprehensive range of DC/DC switching power conversion applications, including isolated supplies, point-of-load converters, server and telecommunications power supplies, VRM and VRD applications, telecom power systems, switching power amplifiers, and smart battery chargers. Its performance characteristics, such as high efficiency, small physical size, and accurate current limit protection make it an ideal choice for the development of these products.

The specific data is subject to PDF, and the above content is for reference