UCC2972PWG4

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The UCC2972PWG4 is a Pulse Width Modulator (PWM) designed to drive a wide range of loads, including systems employing Matched Range Dimming™, Matched Range Flicker™, and Matched Range Color™. It is specifically designed for use as a lighting and ballast controller in medium to high power applications ranging from 12V to 350V.

The UCC2972PWG4 is a highly flexible device, offering a wide range of features, including multiple output driver options, analog and digital temperature compensation, three output modes of operation, adjustable body-diode forward voltage and on-chip ESD protection.

When used as a lighting and ballast controller, the UCC2972PWG4 claims two main advantages over traditional controllers such as pulse-frequency control. Firstly, it is commonly used to control LED drivers in order to achieve superior dimming performance due to its matched range dimming capability. Secondly, it is capable of generating precise, adjustable phase-shifts in order to reduce or eliminate audible noise or buzzing which is often produced by non-linear loads when circuit components are connected or disconnected.

The UCC2972PWG4 is capable of operating in a wide variety of applications, depending on its input modes and output configuration. In its simplest form, the device can be used to control a single-stage ballast, where the input is a DC voltage and the output is used to control the ballast\'s power switch. Alternatively, the UCC2972PWG4 can be used as a two-stage ballast, where the device is connected to two separate switches; one connected to the low side or "once-on" switch and one connected to the high side or "off-on" switch.

The device can also be used in a switch pickup mode, to provide a cut-off signal whenever one of the switches is opened. In this mode, the UCC2972PWG4 can be used to detect a short circuit, open circuit or over voltage condition, preventing further damage to the ballast or load.

Another type of application where the UCC2972PWG4 can prove useful is to control a three-state power supply. This consists of a main power switch, as well as two auxiliary switches. The main power switch is controlled by the UCC2972PWG4, while the auxiliary switches are used to control either a boost or buck converter. This type of application is typically found in applications where the main power supply needs to achieve a wide range of output voltages.

In terms of working principle, the UCC2972PWG4 act as a voltage-mode controller for systems utilizing multiple stages. The device must be configured with the appropriate input mode, either by switching the necessary pins, or by programming them with external TTL signals. Once the appropriate parameters have been set, the UCC2972PWG4 can begin to control the circuit, with the goal of keeping the output voltage at the desired level while providing the desired system regulation.

Overall, the UCC2972PWG4 is an effective and reliable solution for medium to high power lighting and ballast control applications. It offers a wide range of features, such as temperature compensation and on-chip ESD protection, making it an ideal solution when the need for precise control and robust protection is required.

The specific data is subject to PDF, and the above content is for reference