UCC2580N-1

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

The UCC2580N-1 is a high performance, low cost, low-side gate driver integrated circuit from Texas Instruments. Its primary function is to provide control signals for a wide range of switching controllers (e.g. DC-DC switching controllers, current mode controllers for SMPS, or others) with an output voltage of up to 40V and an output current capability of up to 5A. The UCC2580N-1 is designed to provide precise timing of its gate drive signals with minimal current consumption and a high level of robustness, thereby resulting in improved system reliability and efficiency.

The UCC2580N-1 is a non-synchronous, low-side gate driver which is used to drive a wide range of switching devices such as MOSFETs and IGBTs. It has an adjustable gate drive voltage (from 5V to 60V) and a driver current capability of up to 5A. The device also provides overvoltage protection (OVP) for the gate drive voltage and overcurrent protection (OCP) for the switch device.

The device can be used in a variety of applications such as DC-DC converters, SMPS, motor controls, and brushless DC motor control. Depending on the design requirements, the UCC2580N-1 can provide PWM control, current mode control, and linear regulation models. The device is also able to perform skip cycle and burst operation modes.

In addition to the low-side gate drive, the UCC2580N-1 also provides a variety of protection features. These protection features include over voltage protection (OVP), over current protection (OCP), and under voltage lock out (UVLO). In order to keep the device safe from short circuit events and other conditions, a comprehensive protection scheme has been implemented.

The UCC2580N-1 operates in a two-phase half-bridge structure, with a single circuit for low-side and high-side devices. The driver is designed for low-side gate drive applications and has a wide range of possible configurations including push-pull, phase-shift, and multiple phase operations. The driver is also capable of being programmed to either single-ended or full-bridge mode control.

The UCC2580N-1 includes a wide range of features, such as a linear minimum current configuration to set the lowest operating current and an ambient temperature monitoring system to account for temperature variations. The device provides the user with an adjustable gate-source dead time to ensure a zero voltage switching operation and a switch error flag signal to indicate any errors during operation. The device also includes an adjustable slew rate control to limit switching frequency and an open loop protection to prevent fluctuations from occurring when the device is in operation.

The UCC2580N-1 is designed for high power applications, and its output signal can be used for driving power MOSFETs and IGBTs in either buck, boost, or other DC-DC power converter architectures. In summary, the UCC2580N-1 presents a great choice for those looking for a low-cost, low power, efficient, reliable high-side/low-side gate driver with a wide range of features.

The specific data is subject to PDF, and the above content is for reference