UCJ1C101MCL1GS Capacitors

Polarization:	Polar
Package / Case:	Radial, Can - SMD
Mounting Type:	Surface Mount
Surface Mount Land Size:	0.327" L x 0.327" W (8.30mm x 8.30mm)
Height - Seated (Max):	0.413" (10.50mm)
Size / Dimension:	0.315" Dia (8.00mm)
Lead Spacing:	--
Ripple Current @ High Frequency:	250mA @ 100kHz
Ripple Current @ Low Frequency:	125mA @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	UCJ
Operating Temperature:	-40°C ~ 125°C
Lifetime @ Temp.:	2000 Hrs @ 125°C
ESR (Equivalent Series Resistance):	2 Ohm
Voltage - Rated:	16V
Tolerance:	±20%
Capacitance:	100µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Reel (TR)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are one of the most widely used type of capacitors in the electric circuit. They are often used in applications such as filtering, filtering noise, buffering, energy storage, providing a variable voltage source, and providing a current source. These capacitors are made from an anode, usually aluminum foil, which is coated with an oxide film to act as an insulator. The cathode is usually a piece of aluminum foil with an electrolyte-saturated paper separator between the two foils.The UCJ1C101MCL1GS is an aluminum electrolytic capacitor with a capacitance value of 100uF and a rated voltage of 16V. It is a radial type of capacitor, meaning that it has leads extending from both sides of the capacitor.One of the main applications of the UCJ1C101MCL1GS capacitor is in the filtering of high frequency signals. In this application, the input voltage is typically higher than the capacitor’s rated voltage, so it can filter out higher frequency signals. This is due to the fact that the higher frequency signals must pass through the oxide layer of the capacitor before they can reach the cathode, thus filtering out the higher frequency signals.In addition to filtering high frequency signals, the UCJ1C101MCL1GS capacitor can also be used to provide a variable voltage source. By connecting the capacitor across the input voltage or current, the capacitor can act as an "energy storage" device, storing energy as a voltage difference. As the output voltage is changed, the voltage across the capacitor will increase or decrease, thus providing a variable voltage source.The working principle behind the UCJ1C101MCL1GS capacitor is fairly straightforward. When the capacitor is connected across an alternating current source, the changing voltage will cause electrons to move between the anode and cathode, thus charging the capacitor. The capacitor stores this charge, which can be used as a voltage source for powering other electronic components. The UCJ1C101MCL1GS aluminum electrolytic capacitor is also used in buffering and energy storage applications. In these applications, the capacitor is used to store energy, rather than passing it on. When the capacitor is charged, it stores energy, which can then be discharged when needed. This can be used to buffer or store energy for later use. In summary, the UCJ1C101MCL1GS aluminum electrolytic capacitor has various applications, such as filtering high frequency signals, providing a variable voltage source, and buffering and energy storage. It works by storing electrical charge, which can be used as an energy source for powering other electronic components.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description