UHE1C471MPD6

Polarization:	Polar
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	0.492" (12.50mm)
Size / Dimension:	0.394" Dia (10.00mm)
Lead Spacing:	0.197" (5.00mm)
Impedance:	80 mOhms
Ripple Current @ High Frequency:	865mA @ 100kHz
Ripple Current @ Low Frequency:	648.75mA @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	UHE
Operating Temperature:	-40°C ~ 105°C
Lifetime @ Temp.:	7000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	16V
Tolerance:	±20%
Capacitance:	470µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors, such as the UHE1C471MPD6, are efficient components that store energy and are used to provide a short energy boost when needed. These components are often used in many different applications and are available in various sizes and shapes for specific use. The UHE1C471MPD6 is a non-polarized, 35volt, aluminum electrolytic capacitor of the same size as a standard near-shaped capacitor. It is constructed from aluminum foil and a non-solid electrolyte. It has the advantages of a long lifetime, high temperature stability, and low cost. It is one of the most economical and versatile capacitors available today.The working principle of the UHE1C471MPD6 is simple but effective. It contains two thin aluminum foils that have a layer of oxide between them. One foil is connected to the anode, while the other is connected to the cathode. When a voltage is applied to the aluminum foil, the oxide layer creates a barrier, resulting in an electrical charge stored within the capacitor. This electrical charge is stored until the voltage is removed, or until it is discharged.The UHE1C471MPD6 is widely used in many industrial applications, including filters, power supplies, signal processing, switching circuits, filtering, surge protection, and computer power supply. It is commonly used in motor control, where an internal capacitor gives the motor an extra surge of power, allowing it to reach higher speeds without slowing down. It is also used in signal conditioners, where it is used to filter out noise and improve signal clarity. In terms of power supplies, the UHE1C471MPD6 capacitor is often used as a smoothing element to smoothen a power supply’s output voltage. This component helps to provide a steady, uninterrupted output voltage source that allows for better efficiency in the device it is powering.For filtering, the UHE1C471MPD6 capacitor plays an important role in preventing stray signals, or noise, from entering a circuit. By providing a barrier between the input and the output, the component can prevent any unwanted signals from entering or leaving the device. It also helps to ensure that only the desired frequency is accepted by the circuit.Overall, the UHE1C471MPD6 is an incredibly versatile and economical component that can be used in a variety of industrial applications. By providing a short-term energy boost, it is able to increase the performance of many electrical and electronic devices, while also providing protection from noise and interference. As a result, this component can be essential in a range of industries and applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description