UKA1H221MPD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminium electrolytic capacitors offer a large capacitance per unit volume, making them the ideal choice in a wide range of applications. There are two broad types of aluminium electrolytic capacitors: polarised and non-polarised. A polarised aluminium electrolytic capacitor has an anode and a cathode, the anode being marked with a "+" symbol, and the cathode being marked with a "-". This means that a polarised capacitor must always be connected with the correct polarity.

UKA1H221MPD capacitors are one such type of capacitor. These are polarised aluminium electrolytic capacitors with a moulded case, as opposed to a can type capacitor. They are designed for use in DC-only applications, and have a working voltage of 16 V DC.

The working principle of aluminium electrolytic capacitors is based on the principles of electrolysis. An electrolyte, usually an organic solvent, is placed between two aluminium foils. One of the foils forms the anode and the other forms the cathode. When a voltage is applied to the capacitor, ions from the electrolyte react with the foil, forming an oxide layer on the anode. This oxide layer, being an insulator, effectively increases the capacitance of the device.

These types of capacitors are often found in power supplies, mains filters, surge protectors, and other applications. They are also sometimes used in amplifier circuits, where they are placed in series with the speaker in order to reduce the amount of low frequency distortion caused by the speaker impedance matching the amplifier output impedance.

UKA1H221MPD capacitors have a variety of specifications and features, including a tinned wire leaded termination, a temperature range of -40°C to +85°C, and an insulation resistance of 5000MΩ Min (at 500V DC). As a result, these capacitors are suitable for use in a variety of demanding applications, either in power supplies, mains filters, or any other application where a large capacitance in a small volume is required.

In conclusion, UKA1H221MPD capacitors are a type of polarised aluminium electrolytic capacitor designed for DC-only applications. They are designed with a semi-sealed epoxy construction and have a variety of specifications and features, making them suitable for use in a wide range of applications.

The specific data is subject to PDF, and the above content is for reference