UKL0J471KPD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are widely used in a variety of applications, from consumer electronics to industrial and commercial applications. They provide electrical energy storage, allowing for the transfer and storage of charge, and are made up of an anode, a cathode and a liquid electrolyte. The UKL0J471KPD aluminum electrolytic capacitor is a radial leaded capacitor that is used in a wide range of applications, including consumer electronics and audio systems, mobile phones, GPS systems, audio and video equipment and laptop computers.

The UKL0J471KPD capacitor is a polarized aluminum electrolytic capacitor, meaning it must be connected in the circuit in the proper direction with respect to voltage polarity, as it may be damaged if incorrectly connected. It is constructed with a positive and negative terminal, which is connected to the anode and cathode of the device, respectively. Unlike standard capacitors, polarized electrolytic capacitors allow for larger capacitance values for the same device size and are capable of delivering high power and energy storage.

The UKL0J471KPD aluminum electrolytic capacitor is primarily used for power supply applications, such as in switching power supplies, UPS systems and dc-dc converters. They are also suitable for use in high frequency circuits, audio equipment and power electronics. Due to their low ESR and high ripple current ratings, they are ideally suited for smoothing rectified AC power to DC power. They are also often used as part of a filter or a snubber circuit.

The workings of an aluminum electrolytic capacitor are based on the principle of capacitors, where electric charge is stored between two plates separated by an insulating material, referred to as the dielectric. In this type of capacitor, the dielectric consists of a thin oxide film formed on the anode surface of an aluminum foil, and between the anode foil and the electrolyte. The oxide film provides electrical insulation and serves as the capacitor’s dielectric. The negative terminal is connected to the cathode, while the positive terminal is connected to the anode.

When a voltage is applied to the capacitor, electric charge is stored in the form of electric field between the two electrodes. The electric field allows for the transfer of charge and results in the accumulation of charge on each plate, thus creating a potential difference between the two plates. This potential difference, commonly referred to as the capacitor’s capacitance, is proportional to the surface area of the two plates, the thickness of the oxide film and the dielectric constant of the oxide film. When the voltage is removed, the stored charge is discharged.

The UKL0J471KPD aluminum electrolytic capacitor is a highly reliable and efficient device, providing a good combination of capacitance and ESR over a wide temperature range. It is also a cost-effective solution for multiple applications and is widely used in consumer electronics, automotive, electronic controls and power supplies. As such, it is an ideal choice for a wide range of applications, including consumer electronics and audio systems, mobile phones, GPS systems, audio and video equipment, laptop computers, automotive and power supplies.

The specific data is subject to PDF, and the above content is for reference