UKW0J103MHD

Polarization:	Polar
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	0.984" (25.00mm)
Size / Dimension:	0.630" Dia (16.00mm)
Lead Spacing:	0.295" (7.50mm)
Ripple Current @ High Frequency:	2.3A @ 10kHz
Ripple Current @ Low Frequency:	2A @ 120Hz
Applications:	Audio
Ratings:	--
Series:	UKW
Operating Temperature:	-40°C ~ 85°C
Lifetime @ Temp.:	2000 Hrs @ 85°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	6.3V
Tolerance:	±20%
Capacitance:	10000µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors (AECs) are used extensively in a variety of electronics and electrical applications. They are the most commonly used type of capacitor due to their excellent size-to-capacity ratio and low cost. AECs are polarized capacitors with an electrolyte and aluminum anode in a thin film layer separated by paper impregnated with electrolyte. They can store a large amount of electrical energy during operation and are available in small, compact form factors.UKW0J103MHD is a type of aluminum electrolytic capacitors manufactured by Panasonic Corporation. It is available in a variety of capacitance ranging from 10 uF to 220 uF with a maximum voltage of 400 VDC and a temperature range of -40 C to +120 C. This capacitor is used primarily in DC power supplies, motor drives, switched mode power supplies, and low-frequency filtering.The UKW0J103MHD capacitor utilizes a thermally-conductive housing for improved thermal performance. The aluminum anode is coated with an electrolytic film, which allows for a more efficient response to varying electrical loads, higher capacity, and lower equivalent series resistance (ESR). Additionally, the anode is gas-tightly sealed and is packed with nitrogen to prevent corrosion or oxidation. The device is insulated with flame-retardant cast polycarbonate material, making it a suitable solution for electrical applications that require strict adherence to safety standards.The working principle of an AEC is relatively simple. The anode is composed of a thin sheet of aluminum that is coated with an electrolyte, usually a mixture of ammonium bicarbonate or ammonium nitrate in water. This electrolyte serves as an insulator and allows for charge to be stored at the anode. When an electrical charge is applied to the anode, the negative and positive ions in the electrolyte are attracted to each other and become equalized, resulting in a reactive buildup of energy or a “capacitance.”The capacitance of the UKW0J103MHD is determined by the capacitance rating, the temperature range, and the maximum working voltage. The maximum working voltage of 400 VDC means that the device is designed to handle up to 400 volts per cell. It is important to note that the maximum voltage of this device should not be exceeded as it could damage the device. In addition, the capacitance rating needs to be taken into consideration when designing a power supply or circuit as it determines the capacitive reactance, which determines the amount of current it can handle.The UKW0J103MHD capacitor is a general purpose device and can be used in a wide range of applications, including DC power supplies, motor drives, switching mode power supplies, and low-frequency filtering. It is an excellent choice for applications that require high capacitance and low ESR. Furthermore, its insulation and sealing material ensures that the device works safely and reliably in any given environment.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description