ULD1J220MED

Series:	ULD
Part Status:	Active
Capacitance:	22µF
Tolerance:	±20%
Voltage - Rated:	63V
ESR (Equivalent Series Resistance):	--
Lifetime @ Temp.:	10000 Hrs @ 105°C
Operating Temperature:	-25°C ~ 105°C
Polarization:	Polar
Ratings:	--
Applications:	General Purpose
Ripple Current @ Low Frequency:	93.5mA @ 120Hz
Ripple Current @ High Frequency:	170mA @ 100kHz
Lead Spacing:	0.098" (2.50mm)
Size / Dimension:	0.248" Dia (6.30mm)
Height - Seated (Max):	0.492" (12.50mm)
Surface Mount Land Size:	--
Mounting Type:	Through Hole
Package / Case:	Radial, Can

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors are widely used in the field of power electronics. They are available in a wide range of sizes, shapes and capacitance ratings depending on their application. ULD1J220MED capacitors are one of the most commonly used aluminum electrolytic capacitors. They are used to provide a small but constant electrical charge between two electrical contacts.The ULD1J220MED capacitor is made from two dielectric layers and an electrolyte. The two layers consist of a positively charged foil and a negatively charged manganese dioxide (MnO₂) powder. The electrolyte is a paste which acts as the connector between the two layers. The capacitance of this type of capacitor is determined by the thickness of the dielectric layers and the size and shape of the plates.The ULD1J220MED capacitor has a capacitor rating of 220μF at 25V. This means that it can store a certain amount of electric charge, or capacitance, when connected to a given voltage. The charge stored by the capacitor will remain constant once the voltage is raised or lowered.The ULD1J220MED capacitor works by converting direct current (DC) electrical energy into alternating current (AC) electrical energy. When the capacitor is connected to a DC power supply, the electric field across the plates will cause the initial electric charge to flow in a circular motion. This circular motion continues until the AC voltage reaches its peak. Once this occurs, the AC voltage will decrease until it reaches its steady-state value, after which the capacitor will begin to discharge and the circular motion will no longer occur.When the capacitor is used as a power supply for an electrical circuit, it acts as a smoothing device. This smoothing effect is achieved by the redistribution of electrical charge to other elements in the circuit. This process is similar to that of a rechargeable battery.The ULD1J220MED capacitor can also be used in some surge protection circuits. In these circuits, the capacitor is connected in parallel with a resistor. This will reduce the resistance of the circuit and increase its capacitance. This allows for a quick discharge of energy when an overload occurs.The ULD1J220MED capacitor is an ideal choice for applications in the field of power electronics such as power amplifiers, motor drives, voltage stabilizers, and inverters. Its high capacitance rating and reliable performance make it suitable for a variety of applications. It is also very affordable and easy to install.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description