UPH2G560MHD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are widely used due to the combination of their relatively high capacitance, good life span, and low cost. UPH2G560MHD, a commonly used aluminum electrolytic capacitor, is no exception. This article explore the application and working principle of UPH2G560MHD.

Application Field of UPH2G560MHD

UPH2G560MHD is especially applicable for high frequency power electronic equipment, frequency power transformers, UPS and other applications for circuit interference suppression. It has a full range of features, including high energy density, small size, and low loss. In addition, due to its high current rate, UPH2G560MHD is suitable for chassis mounting and plug-in installation under the condition of self-heating.

Working Principle of UPH2G560MHD

The basic working principle of UPH2G560MHD is essentially the same as that of common capacitors. It consists of two separate plates made of aluminum oxide, separated by an organic or inorganic dielectric material. Through this interface, the UPH2G560MHD has an insulated, non-conductive dielectric between them, and an insulating oxide film on each surface of the plates. The oxide film forms a thicker insulating barrier between the two aluminum plates. This makes UPH2G560MHD suitable for operation at high frequencies.

When current flows through the UPH2G560MHD, the oxide film on the two aluminum plates is compressed, forming a thinner insulating barrier and introducing a small amount of leakage current. This allows electrical current to flow through the capacitor and creates an electric field between the two electrodes. This field causes electrons to be attracted towards the positive plate with an electric field, thus allowing current to flow through the circuit.

Due to the insulating oxide film barrier between the plates in the UPH2G560MHD, there is effectively no electrical contact between them. This allows the capacitor to store electric charge, with the amount of charge stored being proportional to the voltage applied between the two plates.

Conclusion

The UPH2G560MHD is an aluminum electrolytic capacitor, with wide applications in high frequency power electronic equipment, frequency power transformers, UPS and other applications for circuit interference suppression, due to its high energy density, small size, and low loss. Its basic working principle is similar to common capacitors, and is based on the insulated oxide film between the two aluminum electrodes, and the electric field between them.

The specific data is subject to PDF, and the above content is for reference