UPJ1C121MED

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are a type of capacitor which uses an aluminum oxide film as the dielectric media. They are the most popular type of capacitor due to their relatively low cost and wide range of capacitance values. The UPJ1C121MED is a type of aluminum electrolytic capacitor from Panasonic. This capacitor is capable of withstanding a voltage of up to 200V and has a maximum rated capacitance of 220µF.

The UPJ1C121MED is a polarized capacitor, which means it cannot be used in both directions in an AC circuit. This means that the direction of the applied voltage must be the same as the marked direction on the capacitor\'s casing. When connected in a circuit, the capacitor acts as a resistor to AC signals, allowing only frequencies above a certain frequency (the cutoff frequency) to pass through. This cutoff frequency is determined by the capacitor\'s value and is known as its self-resonant frequency.

The UPJ1C121MED is used in a variety of applications, ranging from electronics to power supplies. Most commonly, it is used to filter out high frequencies in DC power supplies, allowing the current to remain consistent over time. It is also used in noise suppression applications, where noise generated by motors or other components can be blocked by the capacitor. Additionally, this capacitor is often used in general circuits and current-limiting blockers. It is widely used in both industrial and consumer electronics, including computers, televisions, appliances, and medical equipment.

The working principle of a UPJ1C121MED aluminum electrolytic capacitor is relatively simple. As the name suggests, the capacitor consists of an aluminum oxide film and two electrodes. When a voltage is applied to the terminals, one side of the film accumulates positive charges, while the other side accumulates negative charges. Since these charges are attracted to opposite electrodes, a potential difference is created across the film, producing an electric field.

When the capacitor is connected in a circuit, current flows from one side of the capacitor to the other. This current flows through the film and generates an electrostatic field, which in turn causes the capacitance of the device to increase. This increased capacitance allows the capacitor to store more electrical energy over time, making it an effective device for filtering and regulating voltage and current in a circuit. The amount of capacitance the capacitor can store can be adjusted by changing the spacing between the electrodes.

The UPJ1C121MED aluminum electrolytic capacitor is an excellent choice for a wide variety of applications requiring stable voltage and current regulation. Its polarized terminals make it ideal for filtering out high frequency signals, while its ability to adjust capacitance gives it the flexibility needed to accommodate different circuit requirements. Additionally, the capacitor is highly reliable, making it an ideal choice for industries and applications where reliability is a must.

The specific data is subject to PDF, and the above content is for reference