UPM1A101MED1TD Capacitors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are a type of electrochemical capacitor which uses an electrolyte, typically an inert material such as an organic solvent, to create a double layer between two conductive plates which are typically made of aluminum foil. These capacitors are most often used in DC circuits, often as input and output filters in power supplies. The widespread use of aluminum electrolytic capacitors can be attributed to their relatively high capacitance, low cost, and small package size.

UPM1A101MED1TD is an aluminum electrolytic capacitor designed to meet the requirements of most automotive, telecommunications, and consumer-electronics applications. The capacitors are constructed in a “long-life radial” type, and feature a rated voltage of 10 VDC. This capacitor is suitable for use in high-temperature operating environments, as it has a temperature coefficient of -30 ppm/°C.

The working principle of aluminum electrolytic capacitors is based on their double layer construction. Inside each capacitor there is a thin separator made from an inert material, such as an organic solvent, which is sandwiched between two conductive plates—typically made of aluminum foil. When a voltage is applied to the capacitor, ions from the electrolyte are attracted to one of the conductive plates, and electrons are attracted to the other, creating an electron-ion-separator-electron sandwich. This double layer creates a barrier which is known as the dielectric, and it is what allows the capacitor to store energy.

At the application field of UPM1A101MED1TD, the aluminum electrolytic capacitor is mainly used in communications, consumer electronics and automotive systems. One example is the application with use in surge limiting and DC–DC converters. In DC–DC converters, the double layer of the electrolytic capacitor provides an adjustable high capacity energy storage circuit, which is used to step up and down the voltage in the converter, and to limit any sudden surge of current. The aluminum electrolytic capacitor is also used in the output stages of switching power supplies, where the dielectric helps keep the power supply stable, even when facing high current or voltage demands.

In telecommunications, the UPM1A101MED1TD can also be used to filter out noise from signals. This is accomplished by the capacitor\'s dielectric, which prevents electrical signals from leaking and increases signal-to-noise ratio. Additionally, the aluminum electrolytic capacitor can also be used as a filter in audio systems, as the dielectric reduces the interference of outside noise and provides a clean and clear signal.

In the automotive field, aluminum electrolytic capacitors are used to filter power spikes and voltage surges in the vehicle\'s electrical system. The capacitor\'s dielectric is designed to provide maximum protection while also increasing the current handling capacity. Additionally, the aluminum electrolytic capacitor is also used in the engine management system, as the dielectric provides noise reduction and helps ensure that the ECU is receiving a reliable signal.

Overall, the UPM1A101MED1TD aluminum electrolytic capacitor is designed to meet the requirements of most automotive, telecommunications, and consumer-electronics applications. With its high capacitance, low cost, and small package size, this capacitor is ideal for use in high-temperature operating environments, and is capable of handling a wide range of applications, from filtering out noise in telecommunication systems, to filtering power spikes and voltage surges in automotive systems.

The specific data is subject to PDF, and the above content is for reference