UPM1V331MPD1TD Capacitors

Polarization:	Polar
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	0.866" (22.00mm)
Size / Dimension:	0.394" Dia (10.00mm)
Lead Spacing:	0.197" (5.00mm)
Impedance:	60 mOhms
Ripple Current @ High Frequency:	1.06A @ 10kHz
Ripple Current @ Low Frequency:	810mA @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	UPM
Operating Temperature:	-55°C ~ 105°C
Lifetime @ Temp.:	5000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	35V
Tolerance:	±20%
Capacitance:	330µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Box (TB)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic CapacitorsAluminum electrolytic capacitors are one of the most common and widely used types of capacitors available. They are used in a wide range of applications, from basic consumer electronics to complex industrial and medical equipment. The UPM1V331MPD1TD is a type of aluminum electrolytic capacitor, and is used in a variety of settings.The UPM1V331MPD1TD is a polarized aluminum electrolytic capacitor. This means that the aluminum electrolyte is polarized and requires a polarity-sensitive power applied to it in order to achieve the desired capacitance. It has a capacitance rating of 331 microfarads and a rated voltage of 35 volts. This makes it suitable for applications such as audio crossover networks, power supplies, motor start/stop circuits, and high performance switching regulators.The UPM1V331MPD1TD is a surface-mount device. This means that it is designed to be soldered onto a printed circuit board, rather than plugged into a socket or other mounting device. The surface mount design helps to reduce the component count of electronic devices and allows for much more flexibility in the design of circuits.The UPM1V331MPD1TD is a wet aluminum electrolytic capacitor. This means that the dielectric is made up of an aqueous electrolytic solution, typically aqueous aluminum chloride, which allows electricity to pass through the dielectric. This is in contrast to dry electrolytic capacitors, which use an oil-based dielectric. The wet aluminum electrolytic capacitors are more efficient due to the larger surface area of the electrolyte, which reduces the resistance.The working principle of the UPM1V331MPD1TD is relatively simple. The capacitor consists of two metal plates, typically aluminum, separated by an electrolytic solution. When a voltage is applied, the voltage causes a current to flow between the two plates, resulting in a charge being stored on the plates. This stored charge causes the capacitor to act as a barrier between the two sets of electrical switches, or between two sets of different voltage levels, allowing current to flow only in one direction.In conclusion, the UPM1V331MPD1TD is a surface-mount aluminum electrolytic capacitor with a capacitance of 331 microfarads and a rated voltage of 35 volts. It is used in a variety of applications, from audio crossover networks and power supplies to motor start/stop circuits and high performance switching regulators. Its working principle is based on the electrostatic effect between the two metal plates, creating a barrier between two voltage levels and allowing current to flow in one direction.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description