UPS2W100MHD1TN Capacitors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors are a type of capacitor that mainly uses an aluminum oxide film as the dielectric. Depending on the voltage rating and type of the device, there are several different types of Aluminum Electrolytic Capacitors. Among them is the UPS2W100MHD1TN.

The UPS2W100MHD1TN is a long lifetime low-impedance type Aluminum Electrolytic Capacitor designed to have a lower impedance than the standard Snap-In Type Capacitor. This can help improve reliability and reduce losses in higher frequency applications.

The UPS2W100MHD1TN is suitable for many different applications, such as power supplies, inverters, chargers and other power devices. Its use is particularly beneficial when used in high power systems, such as solar energy and wind power, to maintain the system efficiency and reduce losses. They are also used in filtering and buffer circuits that require a capacitor that can absorb and provide high capacitor loads quickly.

The working principle for the UPS2W100MHD1TN is based on the Faraday\'s Law of electromagnetic induction. Essentially, when an electrical charge is applied to an electrolytic cell, current flows through the thin aluminum oxide layer, which thereby creates a voltage difference between the two sides (positive and negative). This allows current to flow and the stored energy is then released.

In addition, due to the thin layer of oxide, the UPS2W100MHD1TN provides a very low equivalent series resistance (ESR) and low equivalent series inductance (ESL) which are important factors for high frequency and pulsed DC applications. The low ESR also helps reduce inrush currents and improves the capacitor\'s ripple current capacity.

Finally, the UPS2W100MHD1TN features capacitor blocks that are a snap-in design for easy installation. The blocks have an additional internal resistor that helps reduce the inrush current, provides improved capacitance over temperature, and aids in heat dissipation.

Overall, the UPS2W100MHD1TN is a long lifetime low impedance type Aluminum Electrolytic Capacitor that is suitable for a variety of applications and provides low ESR and ESL values. It also features easy snap-in installation and additional internal resistors that offer additional protection and improved performance.

The specific data is subject to PDF, and the above content is for reference