UPW1H560MED1TA

Polarization:	Polar
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	0.650" (16.50mm)
Size / Dimension:	0.248" Dia (6.30mm)
Lead Spacing:	0.098" (2.50mm)
Impedance:	400 mOhms
Ripple Current @ High Frequency:	360mA @ 100kHz
Ripple Current @ Low Frequency:	108mA @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	UPW
Operating Temperature:	-55°C ~ 105°C
Lifetime @ Temp.:	2000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	50V
Tolerance:	±20%
Capacitance:	56µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Box (TB)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors are a type of capacitor that uses an aluminum foil, an insulator paper substrate, an electrolyte, and a rectifier to store electric energy. The aluminum foil is the anode, with a thin oxide film is formed on its surface. The insulator substrate acts as a separator and also provides electrical insulation and structural support. The electrolyte is usually an organic solvent containing acid or alkaline salts. The rectifier is usually a zener diode or a special two-pin metalforming rectifier.UPW1H560MED1TA is a type of aluminum electrolytic capacitors that has a maximum voltage of 560V and maximum capacitance of 1000μF. UPW1H560MED1TA is a two-hole, radial-leaded device, with a D-shaped casing shape. The electrical connections are made with silver-plated contacts. The casing is made of plastic with a thin metal plate. The insulator substrate is made of an insulating paper that is impregnated with epoxy resin. The metal contacts are plated with gold or silver to improve conduction and reduce oxidization.The capacitance of the UPW1H560MED1TA is determined by the size of the electrolytic capacitor, the thickness of the oxide layer on the aluminum foil, the composition of the electrolyte, and the capacitance of the rectifier. By changing the size of the capacitor, the rate of charge, discharge, and stability can be adjusted. The load current capacity of the capacitor is also affected by the number of turns on the coil and the total capacitance of the device. The working principle of the UPW1H560MED1TA is based on the electrical double-layer of an electrolyte. When a voltage is applied to the capacitor, the cations in the electrolyte move towards the negative electrode and the anions move towards the positive electrode, forming an electrical double-layer. This double-layer acts as a dielectric material and stores electric energy, which can then be released. The UPW1H560MED1TA is polarized and the polarity must be observed when connecting it to a circuit.The UPW1H560MED1TA aluminum electrolytic capacitor is used in a wide variety of applications, such as power supply filters, electric motor drives, snubber circuits, motor starting circuits, and switch-mode power supplies. The device offers excellent performance in high-frequency switching and low-frequency storage. The capacitor has a high resistance to heat and vibration. The device is also very reliable and has a long life span of up to 10 years.In summary, the UPW1H560MED1TA aluminum electrolytic capacitor is a two-terminal, polarized device that can be used in a variety of applications. It is a reliable, cost-effective device with excellent performance in high-frequency switching and low-frequency storage. The capacitor is made from aluminum foil, an insulating paper, and a rectifier element, which form an electrical double-layer for storing electric energy. It has a high resistance to heat and vibration and can last for up to 10 years.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description