UPW1J101MPD6TA

Polarization:	Polar
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	0.650" (16.50mm)
Size / Dimension:	0.315" Dia (8.00mm)
Lead Spacing:	0.138" (3.50mm)
Impedance:	230 mOhms
Ripple Current @ Low Frequency:	347.75mA @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	UPW
Operating Temperature:	-55°C ~ 105°C
Lifetime @ Temp.:	3000 Hrs @ 105°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	63V
Tolerance:	±20%
Capacitance:	100µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Tape & Box (TB)

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors are widely used in consumer and industrial electronics due to their low cost, large capacitance values, and relatively stable characteristics. The UPW1J101MPD6TA is a popular type of aluminum electrolytic capacitor. It is a radial lead, long life, miniaturized device with snap-in mounting.

Application Field

The UPW1J101MPD6TA has a wide range of applications in consumer applications such as air-conditioners, refrigerators, and automotive equipment. It is most commonly used as a low-impedance filter capacitor, in DC-DC converters, and for signal tuning or decoupling purposes. This type of capacitor is also well-suited for use as a time-lag capacitor for fluorescent ballasts.

Working Principle

Aluminum electrolytic capacitors are components that utilize an aluminum foil, an electrolyte, and a paper separator. The aluminum foil acts as the dielectric and the electrolyte is most commonly in the form of a liquid. The anodic foil, which is the positive terminal of the capacitor, is made of pure aluminum and has high electrical conductivity. The cathodic foil, which is the negative terminal of the capacitor, is made of aluminum and has had the oxide film etched away. The electrolyte essentially provides a path for electrons to travel between the two terminals.The electrical charge is stored by the capacitor in the form of a positive charge on the anodic side of the capacitor and a negative charge on the cathodic side, thus forming a potential difference across the two terminals. This stored potential energy allows for the capacitor to act as a filter or decoupling mechanism, depending on the circuit configuration. For example, when wired in parallel with a circuit, the capacitor will allow signals to pass through unimpeded, filtering out any undesired noise signals that may have been generated during an electrical process. Alternatively, when wired in series with a circuit, the capacitor can be used to temporarily store electrical energy, which can be then released at a steady rate, providing a more consistent supply of electrical energy.

Conclusion

The UPW1J101MPD6TA aluminum electrolytic capacitor can be used for a variety of applications in consumer and industrial electronics. It offers a low cost, high capacitance value, and a reliable form of energy filtering and decoupling. By utilizing the electrical charge stored by the capacitor, it can provide an effective and reliable source of electrical energy and noise filtering for any circuit configuration.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description