URS1H102MHD1TN Capacitors

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are one of the most widely used capacitors. The URS1H102MHD1TN aluminum electrolytic capacitors are one of the most commonly used capacitors due to their higher capacitance, smaller size, and longer working time when compared to other types of capacitors. They are also relatively cheaper than other types of capacitors.

Aluminum electrolytic capacitors are typically constructed using an aluminum foil anode and a separator which is then rolled into a can, this process helps to create a larger surface area for increased capacitance. The most common type of electrolyte is an oxide layer, which allows for an increased capacitance with a minimal increase in physical size.

The URS1H102MHD1TN is an aluminum electrolytic capacitor that has a rated capacitance of 100uF, a rated voltage of 16V, an operating temperature of -40°C to 105°C, and an operating humidity range of 10-85%. It has a compact size of 10 x 20mm, and is designed for use in a variety of electrical and electronic applications.

One of the most common applications for aluminum electrolytic capacitors is their use in power supply filters. By using a capacitor to filter out undesired noise, such as high frequency noise, transients, and harmonics, the voltage or current to equipment can be regulated in order to ensure it is stable and reliable.

Aluminum electrolytic capacitors are also often used in signal filtering circuits and regulators. By placing a capacitor across an input signal, the AC component of the signal can be filtered out, resulting in a ‘cleaned’ signal that can be used with more accuracy. Similarly, when used in regulating circuits, the capacitor can be used to ensure that the output signal does not become too large or small, and the circuit can be accurately regulated.

Aluminum electrolytic capacitors work by storing electrical energy in an electric field, and then releasing it gradually over time. The capacitor consists of two plates, with one plate made from aluminum and the other from a dielectric material, such as paper or polyester film. When a voltage is applied to the aluminum plate, an electric field is created between the two plates, whereby electrons move from one plate to the other. This creates a chemical reaction between the aluminum and the dielectric material, which creates an electrical current in the capacitor. The current continues until the voltage is removed or the capacitor is completely discharged.

In conclusion, the URS1H102MHD1TN aluminum electrolytic capacitor is a great choice for a wide variety of electrical and electronic applications. It is cost effective, has a high capacitance, and is robust enough to survive in environments with high humidity and temperatures up to 105°C. Its compact size also makes it an ideal choice when space is limited, while its ability to filter out undesirable noise and voltage spikes also makes it particularly useful in filtering and regulator circuits.

The specific data is subject to PDF, and the above content is for reference