URS2A010MDD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors, also known as electrolytic capacitors, are polarized electronic components, mainly used to pass or store electric energy and are an important part of the energy storage system. They are widely used in the fields of filtering, frequency division, coupling, resonance, circuit timing, delay, energy storage, lightning protection and surge absorption.

URS2A010MDD Application Field and Working Principle

URS2A010MDD is an example of Aluminum electrolytic capacitors, with a capacity of 1 μF, voltage of 16V (min) and rated ripple current of 1020mArms. It is widely used in automotive electronics, consumer electronics, computers, communication, office automation and power electronics.

The aluminum electrolytic capacitor is a combination of two layers of aluminum foils and an electrolyte solution with the reactivity of aluminum and oxygen, which is separated by an insulating film. The positive electrode is made of aluminum foil which has been oxidized to form a layer of aluminum oxide. The negative electrode is a sintered porous carbon film. It can filter or convert AC to DC, store electricity, and filter out unwanted high-frequency signals in the circuit.Due to the presence of electrolyte, the capacitor can form a polarized capacitance. This type of capacitor is also characterized by large capacitance, small volume, high energy storage, good self-healing characteristics, etc. Moreover, a large number of aluminum electrolytic capacitors can be connected in parallel to form large-capacity capacitors, which can store more energy.

However, the disadvantages of aluminum electrolytic capacitors include low AC ripple current resistance, short service life and large leakage current. In addition to the frequent replacement of aluminum electrolytic capacitors, special attention should also be paid to the metallization process during the fabrication, as the aluminum foils have special mechanical properties and require a certain skill from workers. As AC ripple current is more important than DC, it is essential to look for a reliable aluminum electrolytic capacitor with a high AC ripple current rating.

In conclusion, URS2A010MDD is a typical aluminum electrolytic capacitor with a capacity of 1μF, voltage of 16V (min) and a rated ripple current of 1020mArms, which is used in automotive electronics, consumer electronics, computers, communication, office automation and power electronics areas. Despite its merits, it still has drawbacks, such as a short service life and low resistance to AC ripple current. Therefore, one should be careful enough when selecting an aluminum electrolytic capacitor and choose one with a higher AC ripple current rating.

The specific data is subject to PDF, and the above content is for reference