US6T7TR Discrete Semiconductor Products |
|
Allicdata Part #: | US6T7TR-ND |
Manufacturer Part#: |
US6T7TR |
Price: | $ 0.00 |
Product Category: | Discrete Semiconductor Products |
Manufacturer: | ROHM Semiconductor |
Short Description: | TRANS PNP 30V 1.5A TUMT6 |
More Detail: | Bipolar (BJT) Transistor PNP 30V 1.5A 280MHz 1W Su... |
DataSheet: | US6T7TR Datasheet/PDF |
Quantity: | 1000 |
Series: | -- |
Packaging: | Tape & Reel (TR) |
Part Status: | Not For New Designs |
Transistor Type: | PNP |
Current - Collector (Ic) (Max): | 1.5A |
Voltage - Collector Emitter Breakdown (Max): | 30V |
Vce Saturation (Max) @ Ib, Ic: | 370mV @ 50mA, 1A |
Current - Collector Cutoff (Max): | 100nA (ICBO) |
DC Current Gain (hFE) (Min) @ Ic, Vce: | 270 @ 100mA, 2V |
Power - Max: | 1W |
Frequency - Transition: | 280MHz |
Operating Temperature: | 150°C (TJ) |
Mounting Type: | Surface Mount |
Package / Case: | 6-SMD, Flat Leads |
Supplier Device Package: | TUMT6 |
Base Part Number: | US6T |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
US6T7TR application field and working principle
US6T7TR is a single bipolar junction transistor (BJT), which is a three-terminal device used to amplify small signals. It is often used in signal processing applications such as modulating, switching, and amplifying, and is also used in other electronics products such as cameras and cellular phones.
A BJT is made up of three layers of semiconductor material, known collectively as the base, collector, and emitter. The base is the layer of semiconductor material between the collector and emitter and contains controlled levels of dopants (impurities) to allow the control of carrier movements. The collector-emitter path acts as an ohmic voltage regulator or an amplifier, and the base-emitter junction is a highly non-linear current regulator that controls how current flows through the device.
The US6T7TR is a NPN-type bipolar transistor, meaning that the negative side of the battery is connected to the base while the positive side is connected to the collector. This arrangement allows electrons to accumulate on the base, which then effectively block the opening of holes, or free electrons, between the collector and emitter. When a small current is applied to the base, the electrons on the base recombine with the holes in the collector, allowing the larger current to flow.
As mentioned, the US6T7TR is used for various signal processing applications, such as amplification, switching, and modulation. The device can also be used in other applications, such as LED lighting, motor control, and audio amplifiers.
The US6T7TR is an efficient and reliable single bipolar transistor that can be used for various signal processing applications. It is easy to implement in many applications and provides good current regulating capability, making it a good choice for signal processing needs.
Conclusion
In conclusion, US6T7TR is a single bipolar junction transistor (BJT) that is used in a multitude of signal processing applications. It has good current regulating capability and is easy to implement. The US6T7TR is a reliable, efficient, and reliable electronic device that is well-suited for many uses.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
US6T4TR | ROHM Semicon... | -- | 1000 | TRANS PNP 12V 3A TUMT6Bip... |
US6T5TR | ROHM Semicon... | 0.13 $ | 1000 | TRANS PNP 30V 2A TUMT6Bip... |
US6T6TR | ROHM Semicon... | 0.16 $ | 1000 | TRANS PNP 30V 2A TUMT6Bip... |
US6T7TR | ROHM Semicon... | -- | 1000 | TRANS PNP 30V 1.5A TUMT6B... |
US6T9TR | ROHM Semicon... | 0.14 $ | 1000 | TRANS 2PNP 30V 1A 6UMTBip... |
GENERAL-PURPOSE TRANSISTORBipolar (BJT) ...
TRANS PNP DARL 30A 120V DIEBipolar (BJT)...
TRANS PNP DARLINGTON DIEBipolar (BJT) Tr...
TRANS GENERAL PURPOSE TO-218Bipolar (BJT...
TRANS PNP 140V 1ABipolar (BJT) Transisto...
TRANS NPN 700V 3A I2PAKBipolar (BJT) Tra...