UUH1A222MNQ1ZD

Series:	UUH
Packaging:	Tray
Lead Free Status / RoHS Status:	--
Part Status:	Active
Moisture Sensitivity Level (MSL):	--
Capacitance:	2200µF
Tolerance:	±20%
Voltage - Rated:	10V
ESR (Equivalent Series Resistance):	--
Lifetime @ Temp.:	5000 Hrs @ 125°C
Operating Temperature:	-55°C ~ 125°C
Polarization:	Polar
Ratings:	--
Applications:	General Purpose
Ripple Current @ Low Frequency:	620mA @ 120Hz
Ripple Current @ High Frequency:	713mA @ 10kHz
Lead Spacing:	--
Size / Dimension:	0.709" Dia (18.00mm)
Height - Seated (Max):	0.689" (17.50mm)
Surface Mount Land Size:	0.752" L x 0.752" W (19.10mm x 19.10mm)
Mounting Type:	Surface Mount
Package / Case:	Radial, Can - SMD

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors are one of the most commonly used types of capacitors available today, especially for applications needing large amounts of capacitance or high voltage and/or temperature ratings. They are made up of an anode (or positive electrode) of aluminum foil surrounded by an electrolyte (typically a solution of boric or phosphoric acid). A second electrode, or cathode, of activated carbon is located below the electrolyte.The UUH1A222MNQ1ZD aluminum electrolytic capacitor is designed for a wide range of applications, such as AC/DC power supplies and signal processing. It is a very reliable and low-ESR (Equivalent Series Resistance) capacitor and can operate at higher temperatures than other electrolytic capacitors. It features an extended temperature range from -55°C to +125°C (-67°F to +257°F), and can withstand up to a maximum voltage rating of 50V. It also has a standard capacitance range of 10µF to 330µF and a maximum capacitance of 470µF.In terms of working principle, aluminum electrolytic capacitors are a type of electronic device that stores energy via a physical separation of positive and negative electrical charges. This is achieved by using a thin layer of oxide film on the anode aluminum foil. The oxide layer provides a very high electrical resistance so that the electrical charges remain separated. When an electrical voltage is applied to the capacitor terminals, the electrical charges will either flow from the positive to negative side of the capacitor, or vice versa. The amount current that is able to flow between the two sides is determined by the size of the capacitor and the magnitude of the electrical potential applied.Additionally, most aluminum electrolytic capacitors come with an internal ESR (Equivalent-Series-Resistance) value. This value represents the power-dissipation resistance generated by the combination of the capacitor’s electrical series resistance and its dielectric losses. The ESR of a capacitor is an important consideration when designing circuits, as it can impact how much power is lost due to heat dissipation, and can affect the overall circuit efficiency. It is important to note that ESR values for capacitors will typically vary depending on the type of capacitor and its application. Finally, aluminum electrolytic capacitors are capable of handling high ripple current loads, so they are typically used in applications where frequent pulses are produced. Additionally, because of their high capacitance and lower cost than other capacitor types, they are often used in power supplies, audio systems, TVs, and other consumer electronics.To summarize, aluminum electrolytic capacitors are a reliable type of capacitor that offer a wide range of benefits, including low ESR, high capacitance, high temperature rating, and low cost. The UUH1A222MNQ1ZD aluminum electrolytic capacitor is a great example of this capacitor type, featuring a standard capacitance range of 10µF to 330µF and a temperature rating of -55°C to +125°C. It is used in a variety of applications, such as DC/AC power supplies, speakers, TVs, and more. The capacitor stores energy via a physical separation of positive and negative electrical charges and is capable of handling high ripple current loads. Overall, aluminum electrolytic capacitors are a great choice when looking for a reliable and low-cost capacitor for a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description