UVR0J332MPD

Polarization:	Polar
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	0.866" (22.00mm)
Size / Dimension:	0.394" Dia (10.00mm)
Lead Spacing:	0.197" (5.00mm)
Ripple Current @ High Frequency:	1.3685A @ 10kHz
Ripple Current @ Low Frequency:	1.19A @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	UVR
Operating Temperature:	-40°C ~ 85°C
Lifetime @ Temp.:	2000 Hrs @ 85°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	6.3V
Tolerance:	±20%
Capacitance:	3300µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Active
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Introduction to UVR0J332MPD Aluminum Electrolytic Capacitors

Aluminum electrolytic capacitors are often used in the electronics industry due to their relatively high capacitance and low cost. Especially around the 21st century, the development of their use has been extremely rapid, thanks to the increasing amount of electronic components and the need for large capacitance to store and power these components. The UVR0J332MPD is part of the aluminum electrolytic capacitor family and has multiple applications.

Capacitor Construction and Working Principle

UVR0J332MPD Aluminum electrolytic capacitors consist of two terminals, a foil and the electrolyte. The two terminals are typically made of aluminum, which provides a good electrical contact to the terminals. Furthermore, aluminum is widely available and relatively inexpensive.The foil inside the capacitor is the most important part, as it is the part which provides the capacitance. The foil is usually made of aluminum foil and is inserted into the capacitor in a way that creates a closely packed, parallel maze. This maze of aluminum foil is typically filled with an electrolyte, such as KOH, and the electrolyte provides the capacitance.The working principle of the capacitor is simple. When voltage is applied to it, the electrolyte creates an electric field between the foil and the terminals, which creates an electric charge. The charge increases the capacitance of the capacitor, and the capacitor acts as a capacitor to store the charge for later use.

Applications of UVR0J332MPD Aluminum Electrolytic Capacitors

UVR0J332MPD Aluminum electrolytic capacitors are mainly used in high voltage applications, such as edge lighting applications, lasers, and other high power circuits. The capacitance of this type of capacitor is usually larger than other similar capacitors, and due to its robust construction, they are also used in applications which require higher voltage and temperature ratings. The aluminum electrolytic capacitors can also be used in high frequency circuits, such as radio frequency amplifiers, due to their high capacitance and relatively low inductance. Aside from that, the aluminum electrolytic capacitors are also used in some analogue circuits, especially audio circuits, for their low noise and good shock resistance. These capacitors are also useful for motor control applications, as they can provide protection against turn-on surges and reduce voltage spikes at the motor terminals. With their relatively high capacitance, these capacitors are also ideal for power factor correction.

Conclusion

UVR0J332MPD Aluminum electrolytic capacitors are an important part of the aluminum electrolytic capacitor family and have numerous applications in the electronics industry. The capacitors consist of two terminals, a foil and the electrolyte, which provides the capacitance when voltage is applied to it. The aluminum electrolytic capacitors are mainly used in high voltage applications, such as edge lighting, lasers, and other high power circuits, and can also be used for high frequency circuits, motor control applications, and power factor correction.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description