UVR2C220MPA

Polarization:	Polar
Package / Case:	Radial, Can
Mounting Type:	Through Hole
Surface Mount Land Size:	--
Height - Seated (Max):	0.689" (17.50mm)
Size / Dimension:	0.394" Dia (10.00mm)
Lead Spacing:	0.197" (5.00mm)
Ripple Current @ High Frequency:	248mA @ 10kHz
Ripple Current @ Low Frequency:	155mA @ 120Hz
Applications:	General Purpose
Ratings:	--
Series:	UVR
Operating Temperature:	-40°C ~ 85°C
Lifetime @ Temp.:	2000 Hrs @ 85°C
ESR (Equivalent Series Resistance):	--
Voltage - Rated:	160V
Tolerance:	±20%
Capacitance:	22µF
Moisture Sensitivity Level (MSL):	--
Part Status:	Obsolete
Lead Free Status / RoHS Status:	--
Packaging:	Bulk

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Aluminum electrolytic capacitors are one of the most commonly used types of capacitors. They are made from aluminum foil and covered with an electrolyte material. The UVR2C220MPA is a radial lead, non-polarized aluminum electrolytic capacitor. It is used for applications in which a capacitor is needed that can handle a relatively large amount of current.The UVR2C220MPA is often used in decoupling, power supply smoothing, and other voltage regulation applications. The capacitor is designed to handle capacitances up to 220µF and has a rated voltage of 16 VDC. The operating temperature range is -40 to +85°C. The UVR2C220MPA has a maximum ripple current rating of 2.3 A.The working principle of an aluminum electrolytic capacitor is based on the flow of electrical current between two plates of aluminum foil, separated by an electrolyte material. The electrolyte material, which is usually an aqueous salty substance, conducts electricity and stores energy. The electrical current passing between the two plates of aluminum builds up a charge, which is stored in the electrolyte until the current is reversed or the capacitor is discharged.When the aluminum electrolytic capacitor is connected to a DC power source, it acts as a filter, allowing only direct current (DC) to pass through it. The aluminum electrolytic capacitor’s ability to store energy allows it to filter out any AC signals, since the waves are constantly changing. This filtering effect is used in many applications, such as radio receivers and voltage regulators.The UVR2C220MPA is constructed from a radial leaded, non-polarized aluminum electrolytic capacitor. This type of capacitor has two plates of aluminum that are separated by an electrolyte material. The center of the capacitor contains a lead that is connected to the positive terminal, while the outermost part of the capacitor is the negative terminal. The lead connections are made with either wire leads or screw terminals.The UVR2C220MPA is widely used in a variety of applications. It is typically used in voltage regulators for power supplies, decoupling applications, and other types of power conditioning. The UVR2C220MPA is also used in radio receivers, audio equipment, and other electronic transmission devices due to its ability to filter out AC signals. The capacitor is also used in a variety of automotive applications, including fuel injection systems and engine management systems.In summary, the UVR2C220MPA is an aluminum electrolytic capacitor used for applications that require a capacitor capable of handling high current. The capacitor is designed to filter out AC signals and is commonly used in decoupling, power supply smoothing, and other voltage regulation applications. The UVR2C220MPA is also used in automotive applications, radio receivers, and other electronic transmission devices.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description