V10DM60CHM3/I Discrete Semiconductor Products

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes - Rectifiers - Arrays are a type of electronic component that is commonly used in a variety of applications where a power source is required. They are designed to convert alternating current (AC) into direct current (DC), and can come in different configurations, such as single diode, bridge rectifier, or array. The V10DM60CHM3/I is a diode array used in applications such as DC-DC conversion, motor control, and overvoltage protection.

The V10DM60CHM3/I is a 600V, 10A fast-recovery surface-mountable diode array. It is composed of two MOS-controlled rectifiers connected in series, with five external connections. It has a surge current rating of 90A and a working current rating of 10A. The diode features low I_FS, low V_F, and high efficiency. It also has a high self-heating capability and a low forward voltage drop. The diode also features a dV_F/dt of 5V/ns, which enables high-frequency switching.

The V10DM60CHM3/I diode array can be used in a variety of applications, including power supplies, DC-DC converters, motor controls, and overvoltage protection circuits. In power supplies, it is commonly used as a full wave rectifier, converting AC power into DC power. In DC-DC converters, it can be used to step down or step up the voltage of an input power supply in order to provide the correct voltage to the load. In motor controls, the diode array can be used to ensure that only one direction of current flow is possible. Finally, in overvoltage protection circuits, the diode array can be used to limit the maximum voltage applied to the load.

The working principle of the V10DM60CHM3/I diode array is based on MOSFETs. When the MOSFETs are in the on-state, current can flow through the circuit, and when they are in the off-state, no current can flow. The voltage rating of the diode determines the maximum voltage that can be applied to the load. The current rating determines the maximum current that can pass through the diode. The diode array also features a di/dt control pin, which can be used to adjust the current-carrying capacity, turn-on/turn-off speed, and energy dissipation.

In summary, the V10DM60CHM3/I diode array is a powerful and versatile element used in a variety of applications where a power source is needed. It can be used for full wave rectification, DC-DC conversion, motor control, and overvoltage protection. It features a 600V voltage rating, a 90A surge current rating, and a 10A working current rating, as well as a low forward voltage drop, a high self-heating capability, and a dV_F/dt of 5V/ns. It is composed of two MOS-controlled rectifiers connected in series, with five external connections. It works by controlling the on/off state of the MOSFETs in order to regulate the current flow in the circuit.

The specific data is subject to PDF, and the above content is for reference