V10E140PL1T7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

V10E140PL1T7 is an electronic component belonging to the family of TVS or Transient Voltage Suppressors, also known as Varistors and MOVs. A TVS is like an overall protector against voltage transients and spikes, its main use is to protect a component from giving out too much power or receiving too much power. This component is part of a group of electronic components whose function is to limit the voltage going to or from another component.

The V10E140PL1T7 is a voltage transient suppressor characterized by a round-shaped metal-oxide-semiconductor (MOS) varistor. It has an open-drain configuration and is rated at 140 volts and 0.2 ohms. Its application field is for protecting components such as memories, peripheral cards, and radio frequency circuits from over-voltage damage. It is designed to clamp voltages to a defined maximum voltage level without electrically isolating the components from each other.

The working principle of V10E140PL1T7 is based on the fact that when a voltage is applied to the varistor, the electric field generating between the electrodes on the surface of the varistor increase. This increases the resistance between them, limiting the voltage applied to the component. When a voltage greater than the rated voltage is applied, a large amount of current passes through the varistor, which acts as a conductor, absorbing and dissipating the excess energy.

When installing the V10E140PL1T7 there are certain safety points to take into consideration. It is important to make sure that the time-current characteristic of the varistor does not exceed its maximum rating. It is also necessary to check the temperature coefficient of the varistor, since increases in temperature can cause changes in the characteristics of the varistor. To ensure safety, it is best to install the component on a heat sink to dissipate heat.

In conclusion, V10E140PL1T7 is a voltage transient suppressor belonging to the family of TVS, Varistors, and MOVs. It is designed to protect components from over-voltage and voltage transients by limiting the voltage applied to them. Its working is based on the fact that when a voltage is applied, the electric field generating between the electrodes increases, limiting the voltage. Care is to be taken when installing the component as to abide by safety guidelines.

The specific data is subject to PDF, and the above content is for reference