V14E150PL4B7

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS (Transient Voltage Surge Suppression) and MOV (Metal Oxide Varistors) are both devices that are used to protect against transient voltage and surges. The V14E150PL4B7 is a type of TVS and MOV device, specifically designed to protect against events such as lightning strikes, overloads, and other electrical surges.

This type of device is a voltage-dependent, non-linear, four-terminal, metal oxide type, variable resistor. The V14E150PL4B7 is designed to divert current away from sensitive circuitry, and protect against voltage spikes up to 1500V. It is generally used in applications such as Telecom, Electronic Ballasts, and Power Supplies.

The working principle behind the V14E150PL4B7 is relatively simple. When the voltage is at a normal operation level, the device has a low resistance, and the current will flow through the device normally. When a surge in voltage occurs, the resistance inside the device will increase significantly, clamping the voltage and diverting the surge away from the circuitry that it is connected to.

The V14E150PL4B7 is composed of a ceramic core, two endcaps, and two high-temperature pins. The ceramic core is made up of zinc oxide, and both endcaps are made of a conductive material, such as copper. The pins are connected to the top and bottom endcaps, and when a surge in voltage occurs, it is the pins that first clamp the voltage.

The device has a rated holding voltage of 1250V, a leakage current of 5mA, and a Maximum Operating Voltage of 1500V. It is also designed to operate from -55°C to +125°C, and has a flat dynamic range of 1mA to 400mA.

The V14E150PL4B7 is generally used in applications such as Telecom systems, Electronic Ballasts, Transportation systems, Industrial machinery, and Consumer electronics. In Telecom applications, such as radio masts and telephone networks, the device is used to protect against lightning strikes and other power surges. In Electronic Ballasts, it is used to protect lights from overloads, and to diverge lightning strikes away from the circuitry.

In Transportation systems, such as cars and aircraft, the V14E150PL4B7 is used to protect sensitive electronic components from high voltages that can occur during restart or transmission changes. Similarly, it is also used to protect industrial machinery, and other consumer electronics, from power surges.

In conclusion, the V14E150PL4B7 is a type of TVS and MOV device, designed to protect sensitive electronics and circuitry from voltage surges. It is composed of a ceramic core, two endcaps, and two high-temperature pins, and is rated to operate from -55°C to +125°C. It is generally used in applications such as Telecom systems, Electronic Ballasts, Transportation systems, Industrial machinery, and Consumer electronics.

The specific data is subject to PDF, and the above content is for reference