V56ZA2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

In the field of power conversion, especially in cases where transients are encountered or expected, one of the most common devices employed is the varistor, also known as the metal-oxide varistor (MOV). The purpose of a varistor is to protect electrical circuits from high-level voltage transients. It is a resistor device with a variable resistance that depends on both the magnitude and polarity of the voltage. The most widely used type of varistor is the zinc oxide (VZO) type, which has a bi-directional voltage response: it provides more protection from larger positive or negative (but equal) voltages.

The VZO type of varistor is classified by its voltage varistor testing codes, which denotes the voltage sensitivity of the component in question. The typical VZO range is VZ (or VZO) to VZ51. VZO2 happens to be one of the most popular voltage varistor testing code among the components in the VZO family, as it offers relatively good voltage protection without having to be excessively large in size. The VZO2 type of varistor is most commonly used in power supply and signal line protection, and it features a gapped, non-conductive oxide layer that works like an avalanche diode when exposed to a high reverse bias voltage.

The VZO2 type of varistor has an operating range from -50 to 440 volts, with a peak surge rating of up to 6000 volts. This means it is capable of handling higher than normal electrical overloads without damaging the protected circuit. In addition, the VZO2 is also designed for high dv/dt, making it suitable for use in high speed switching applications.

In operation, the VZO2\'s non-conductive oxide layer acts like a diode, providing increased protection from higher voltages due to its bi-directional voltage response. It works by limiting current to a certain level depending on the applied voltage. When exposed to a positive or negative voltage, the granular material of the oxide layer breaks down and creates an avalanche effect, thereby limiting any surges or complaints that may be caused by larger voltages.

The VZO2 type of varistor also offers temperature compensation, making it suitable for use in applications where temperature fluctuations occur or are expected. This helps to ensure that the device is functioning to its optimal capacity in any given environment or application, and thus it can be expected to last longer than other devices that are not temperature compensated.

The VZO2 type of varistor is usually used in power supplies, power amplifier protection, signal line protection, computer peripheral protection, DC-DC converter protection, and in the protection of AC power circuits. While it can provide effective protection against transients and other electrical overloads, it is not designed to be a complete protection solution, and should be used in combination with other surge protection components such as fuses and filters.

In summary, the VZO2 type of varistor is a widely used device for electrical protection due to its bi-directional voltage response, peak surge ratings, and temperature compensation. It is most commonly used in power supply and signal line protection, computer peripheral protection, DC-DC converter protection, and in the protection of AC power circuits. However, it should be used in combination with other surge protection components in order to provide complete protection from electrical overloads.

The specific data is subject to PDF, and the above content is for reference