V56ZT3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

TVS - Varistors, MOVs are devices that protect sensitive electronic components from voltage transients. The V56ZT3 device is a voltage-dependent, bi-directional, electronic circuit protector (or transient voltage surge suppressor, TVSS) primarily designed for open-circuit protection of electronic circuits..

The V56ZT3 is made up of a metal oxide varistor (MOV), or Voltage-dependent Resistor (VDR). The MOV is a non-linear, resistive element which changes its resistance value in response to the applied voltage. When the polarity of the applied voltage is reversed, the MOV’s resistance also reverses and changes its direction.

When a voltage transient above the breakdown voltage of the MOV is applied, the MOV’s resistance decreases very quickly and can be reduced to zero. This allows the current to pass through the MOV and bypass the circuit. This quick response time allows the MOV to absorb and disperse the transient energy before it can cause any damage.

In the V56ZT3 device, the MOV is integrated into a printed circuit board and connected in series with two capacitors which act as a filter to reduce high frequency transients. The MOV is connected in series with a resistor for current limiting protection. The MOV is also connected to an isolation diode which helps to protect the MOV from reverse current.

The MOV in the V56ZT3 provides two primary functions: short-circuit protection and line-to-ground protection. By using the MOV in series with the two capacitors, it provides short-circuit protection which prevents excess current from flowing through the circuit in the event of a short circuit. By connecting it in series with a resistor, it provides line-to-ground protection which prevents any voltage transient from reaching the ground.

The V56ZT3 device is used in various applications including Automotive, Industrial control, Telecom, and Consumer electronic equipment. It is used to protect sensitive electronics from damaging overvoltage transients. In automotive applications, it is typically used to protect against overvoltage caused by brief impulse or high energy transients. In Industrial control applications, it is used to protect controllers from electrical surges caused by short circuits or other faults. In telecommunication applications, it is used to protect circuits from overvoltage caused by lightning strikes or other high energy transients. Finally, in consumer electronics applications, it is used to protect circuits from overvoltage caused by power surges, static electricity, and ESD.

In summary, the V56ZT3 is a bi-directional electronic circuit protector designed for open-circuit protection of sensitive electronic components from voltage transients. It consists of a MOV, two capacitors, a resistor, and an isolation diode. It provides both short-circuit and line-to-ground protection. The V56ZT3 is used in a variety of applications including Automotive, Industrial control, Telecom, and Consumer electronic equipment.

The specific data is subject to PDF, and the above content is for reference