V575LC80B

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

V575LC80B is a Varistor device used primarily for transient voltage surge and spike protection. It is a discrete Bidirectional Transient Voltage Suppressor (TVS) designed to protect two-wire and Component heatlines from transients in applications where ESD (electrostatic discharge), lightning and other forms of overvoltage transients, directly or indirectly coupled into the lines, may be expected.

The V575LC80B is a TVS Diode that operates as a metal-oxide-semiconductor (MOS) device. A MOS device is an insulated-gate field effect transistor that is used to protect voltage-sensitive components from electrostatic discharge, overvoltage surges, and transient voltage spikes. The protection mechanism occurs when voltage current exceeds the rated voltage of the MOS device, causing the MOS device to absorb some of the excess voltage, thus limiting the voltage that reaches the components.

The V575LC80B has an 11 Volt surge ratings and a 575 Volt working voltage and a maximum current of 80 Amps. It is available in two different package sizes (5mm x 5mm and 3mm x 4mm) and is manufactured with a low capacitance of 1.5pF. It has an operating temperature range of -55°C to +125°C, making it suitable for a wide range of applications including automotive, industrial, consumer, and medical applications.

The V575LC80B is used to provide protection against high energy transients, as well as guarding low power circuits against destructive overvoltage and ground fault conditions. It is an ideal technology for providing bidirectional overvoltage and electrostatic protection for low noise circuits by providing broadband overvoltage protection. The V575LC80B has an optimized low-capacitance design for minimal signal distortion and fast response times, allowing it to be used in a wide variety of applications.

The V575LC80B works by absorbing excess energy during a transient. The V575LC80B acts as an absorber of voltage, using its internal resistance to create a barrier between the power supply and the device it is protecting. When a negative transient occurs, the V575LC80B absorbs the energy, raising its internal voltage above the device supply. Once the transient is over, the increased voltage then dissipates as heat due to the V575LC80B’s high internal resistance.

In the event of a positive transient, the V575LC80B will trigger and clamp the voltage to the device supply—preventing the excess energy from entering the device. In this case, the V575LC80B will absorb some of the energy, but it does not dissipate as much heat as with a negative transient.

The V575LC80B is an ideal solution for surge and overvoltage protection in a variety of applications, including consumer electronics, computers, telecommunications, and automotive systems. It is particularly well suited for applications where low capacitance is desired and bidirectional protection is required. The device’s small footprint, low capacitance, and fast response time make it an ideal choice for many industrial and commercial applications.

The specific data is subject to PDF, and the above content is for reference