V575LC80BPX10 Circuit Protection

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Varistors, or voltage-dependent resistors, are electronic components used in circuits to limit the voltage applied to sensitive parts of electrical or electronic systems. The V575LC80BPX10 is a nonlinear varistor designed for use in high-voltage surge protection applications.

The V575LC80BPX10 devices are made up of a zinc oxide (ZnO) substrate, enclosed in a cylindrical housing. This enclosure provides protection from mechanical damage and enables the V575LC80BPX10 to be soldered directly to the PCB. The V575LC80BPX10 also has a 0.2µm air gap around the ZnO substrate that helps reduce dissipation of transient energy and prevents arcing at the metal-oxide interface during transient events.

The V575LC80BPX10\'s non-linear characteristic is its main application in surge protection circuits. A non-linear characteristic means that the resistance of the V575LC80BPX10 varies with voltage applied. At low voltage levels, the V575LC80BPX10 will offer a high impedance and will pass minimal current through the line. However, when the voltage rises above a certain threshold, the V575LC80BPX10 will exhibit a much lower resistance and will allow large currents to flow. This makes it ideal for protecting circuits from high voltage transients.

The V575LC80BPX10 is designed to clamp surges in high voltage applications. This is achieved by connecting it in parallel to the circuit that needs to be protected. During normal operation, the V575LC80BPX10 will remain open, allowing the line to remain undisturbed. When the voltage rises too high, the V575LC80BPX10 will begin to conduct and will dissipate some of the energy in the line, protecting the circuit.

The V575LC80BPX10 is most commonly used in AC mains surge protection circuits. The V575LC80BPX10 is placed across the mains’ AC line, with all other components connected in parallel to the V575LC80BPX10. This allows it to absorb any transient spikes in voltage and divert them away from the load, protecting it from damage. It can also be used in battery packs and DC-DC converters for similar surge protection.

The V575LC80BPX10 is a versatile component and can be used in a variety of high voltage surge protection circuits. Its non-linear characteristic means that it can be triggered at any voltage level, allowing it to be tailored to different applications. Furthermore, its air gap design helps to reduce the dissipation of energy and helps to prevent arcing.

The specific data is subject to PDF, and the above content is for reference