VBT1080C-E3/4W

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Diodes are electronic components which act as a one-way valve, allowing current to flow in one direction but not in the other. Rectifiers are electronic components which are used to convert alternating current (AC) into direct current (DC). Arrays are groups of similar electronic components connected in series or parallel to perform a specific function. The VBT1080C-E3/4W is an array of diode rectifiers which are used for a variety of applications.

The VBT1080C-E3/4W can be found in a wide array of applications and devices, both commercial and consumer. It is suitable for use in many AC/DC power converters, including AC to DC power supplies, DC to DC converters, and adapter applications. In addition, it is often used in a variety of circuit protection applications, including over-voltage, under-voltage, over-load, and short-circuit protection. It is also used in many analog and digital switching circuits, as well as in various telecommunications and automotive applications.

The VBT1080C-E3/4W is a four-pin, high-performance array with a fast recovery time of less than 25 nanoseconds. It is constructed of four TO-252A chips, each with a diode rectifier array, and an SO-8 middle chip. The diode rectifiers consist of four silicon n-channel depletion-mode MOSFETs with a darlington connected source-drain structure. The SO-8 chip contains an arrangement of low-voltage protection, logic, and voltage conduction components. This makes the VBT1080C-E3/4W capable of handling a wide range of power input, up to 240V or 1,000V, with a wide range of current input, up to 10A.

The working principle of the VBT1080C-E3/4W is relatively straightforward. As current flows through the diode rectifiers, the depletion-mode MOSFETs create a barrier, preventing the current from flowing in the opposite direction. The low-voltage protection components then monitor the input voltage of the device and prevent it from exceeding the specified limits. This helps protect the device from high voltage transients or surges, while allowing it to take full advantage of its high power handling capability.

In addition to providing protection, the VBT1080C-E3/4W also helps to improve the overall efficiency of the device. The integrated logic helps to reduce power consumption by providing a delay before turning on the rectifiers, thus reducing the current spikes. This helps to improve the overall efficiency of the device and reduce the amount of heat generated.

The VBT1080C-E3/4W is a versatile, high-performance array of diode rectifiers. It is suitable for a wide range of AC/DC, DC/DC and adapter applications, as well as circuit protection, analog and digital switching, and telecommunications applications. The integrated low-voltage protection, logic, and power handling capabilities make it an ideal solution for applications requiring reliable, efficient operation.

The specific data is subject to PDF, and the above content is for reference