Allicdata Part #: | 497-4497-5-ND |
Manufacturer Part#: |
VND600 |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | STMicroelectronics |
Short Description: | RELAY SSR 2CHAN HI SIDE 16SOIC |
More Detail: | N/A |
DataSheet: | VND600 Datasheet/PDF |
Quantity: | 1000 |
1 +: | 0.00000 |
Voltage - Supply (Vcc/Vdd): | Not Required |
Base Part Number: | VND600 |
Supplier Device Package: | 16-SO |
Package / Case: | 16-SOIC (0.295", 7.50mm Width) |
Operating Temperature: | -40°C ~ 150°C (TJ) |
Fault Protection: | Current Limiting (Fixed), Over Temperature, Over Voltage |
Features: | Auto Restart |
Input Type: | Non-Inverting |
Rds On (Typ): | 35 mOhm (Max) |
Current - Output (Max): | 25A |
Series: | -- |
Voltage - Load: | 5.5 V ~ 36 V |
Interface: | On/Off |
Output Type: | N-Channel |
Output Configuration: | High Side |
Ratio - Input:Output: | 1:1 |
Number of Outputs: | 2 |
Switch Type: | General Purpose |
Part Status: | Obsolete |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
The VND600 is a power distribution switch and load driver produced by Intersil. It is designed for applications that require a higher power handling ability than what is ordinarily available in a conventional power distribution switch. It works in two stages, in a Push-Pull configuration. This configuration allows for a higher current capacity than what is possible with a single stage distribution switch, while allowing the voltage and current to be adjusted separately.
The VND600 has three main functions. First, it acts as a power distribution switch. This means that it allows the user to route power to different locations on the circuit board. It can also act as a load driver when connected to a power supply, allowing the user to control the flow of current to a connected load. This can be useful in applications where the power supply is not able to provide the same amount of current for each load. The third function of the VND600 is to provide a failure prevention mechanism. If the load current becomes too high, the switch will detect this, shut itself off, and notify the user of the failure.
The VND600 is designed with a wide range of features. It is rated to handle up to 10A of current, with an adjustable voltage range of 2.5V to 20V. It has built-in over-voltage, under-voltage, and over-temperature protection features that help protect the circuit board and connected load. The VND600 also has a low power standby mode, allowing it to consume only a small amount of power when not in use. Additionally, the VND600 is designed for easy integration with other components in the design. It is compatible with a variety of devices, such as analog switches, digital switches, and PWM controllers.
The working principle behind the VND600 is fairly straightforward. When power is applied to the VND600, it immediately turns on and begins distributing power to the connected loads. The voltage and current can be adjusted separately using the voltage and current controls. When the load demands more current than the VND60 can handle, it shuts itself off and alerts the user of the over-current condition. This prevents the circuit board and connected load from being damaged due to excessive current.
The VND600 is a versatile and reliable power distribution switch and load driver. It is designed to be easy to integrate with other components in the circuit, and can handle up to 10A of current. It has built-in over-voltage, under-voltage, and over-temperature protection features, and can be adjusted to different voltage and current levels. Finally, it has a low-power standby mode that allows it to consume only a small amount of power when not in use. Overall, the VND600 is an excellent choice for applications that require a higher power handling capability than what is ordinarily available in a conventional power distribution switch.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
VND600PEP-E | STMicroelect... | 1.34 $ | 1000 | IC DRIVER HIGH SIDE 2CH P... |
VND600PEPTR-E | STMicroelect... | -- | 3000 | IC DRIVER HIGH SIDE 2CH P... |
VND600-E | STMicroelect... | -- | 1000 | IC DVR HIGH SIDE 2CH 25A ... |
VND600PTR-E | STMicroelect... | -- | 1000 | IC DVR HIGH SIDE 2CH POWE... |
VND600P-E | STMicroelect... | -- | 1000 | IC DVR HIGH SIDE 2CH 16SO |
VND600SPTR-E | STMicroelect... | -- | 0 | IC DRIVER HIGH SIDE 2CH P... |
VND600SP-E | STMicroelect... | 2.16 $ | 1000 | IC DRIVER DUAL 36V 25A PW... |
VND600SP | STMicroelect... | -- | 1000 | IC DRIVER DUAL 36V 25A PW... |
VND600SP13TR | STMicroelect... | -- | 1000 | RELAY SSR 2CH 36V POWERSO... |
VND670SP | STMicroelect... | 0.0 $ | 1000 | IC SWITCH DUAL HISIDE POW... |
VND670SP13TR | STMicroelect... | 0.0 $ | 1000 | IC SWITCH DUAL HISIDE POW... |
VND600 | STMicroelect... | 0.0 $ | 1000 | RELAY SSR 2CHAN HI SIDE 1... |
VND60013TR | STMicroelect... | -- | 1000 | RELAY SSR 2CHAN HI SIDE 1... |
VND600TR-E | STMicroelect... | 0.0 $ | 1000 | RELAY SSR 2CHAN HI SIDE 1... |
EXPRESS CARD PWR SWITCH
PSC LOAD SWITCH V-DFN3030-10
IC DARL DRIVER ARRAY 4CH
IC USB POWER SWITCH 8MSOP
IC SW IPS 1CH HIGH SIDE D2PAK-5
IC SW IPS 1CH HIGH SIDE 8SOIC