Allicdata Part #: | VND600PEPTR-E-ND |
Manufacturer Part#: |
VND600PEPTR-E |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | STMicroelectronics |
Short Description: | IC DRIVER HIGH SIDE 2CH PWRSSO24 |
More Detail: | N/A |
DataSheet: | VND600PEPTR-E Datasheet/PDF |
Quantity: | 3000 |
Voltage - Supply (Vcc/Vdd): | Not Required |
Base Part Number: | VND600 |
Supplier Device Package: | PowerSSO-24 |
Package / Case: | PowerSSO-24 |
Operating Temperature: | -40°C ~ 150°C (TJ) |
Fault Protection: | Current Limiting (Fixed), Over Temperature, Over Voltage |
Features: | -- |
Input Type: | Non-Inverting |
Rds On (Typ): | 30 mOhm (Max) |
Current - Output (Max): | 25A |
Series: | -- |
Voltage - Load: | 5.5 V ~ 36 V |
Interface: | On/Off |
Output Type: | N-Channel |
Output Configuration: | High Side |
Ratio - Input:Output: | 1:1 |
Number of Outputs: | 2 |
Switch Type: | General Purpose |
Part Status: | Active |
Packaging: | Tape & Reel (TR) |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
VND600PE is a special integrated circuit (IC) designed for consuming higher power than embedded microcontrollers can normally handle. It works by distributing electrical power to different loads with different abilities to consume power. This makes the VND600PE ideal for applications where higher level processors are required to control multiple loads. Due to the nature of its design, the VND600PE can also act as a current amplifier, providing regulated current to certain segments of a circuit.
The power distribution switch within the VND600PE allows it to make multiple precise settings of load paths in order to accurately divide current and voltage across a load bank. A load driver, also built-in to the VND600PE, automatically optimizes the power draw between any two load circuit elements or two stages of any load circuit. The load drivers are constantly monitoring the power demand and making the necessary adjustments in order to maintain the optimal current flow.
When it comes to power management, the VND600PE is equipped with many regulating features. The power supply to the circuit can be managed from between 6 to 50 Volts, with maximum current outputs reaching up to 20 Amps. This type of setup is beneficial for circuits running with high electrical loads as it ensures the power is distributed properly and safely. The power regulation also supports power saving throughout the circuit by providing an adjustable voltage trimming range.
To control its power output and power distribution, the VND600PE uses several digital input pins. By setting the value of the inputs, the power output and power distribution can be controlled from the outside. This makes it possible to control the power flow more precisely and install more efficient power circuits. One of the great advantages of this type of power management design is that it is independent of the logic chip used to control it.
The VND600PE provides numerous protection features for a power system. Its voltage and current feedback loops can detect overvoltage and short-circuit conditions in order to prevent damage to the power subsystem. The power switching device is also protected from overloading by limiting the current it can draw from the source. This protection is further enhanced by several integrated temperature sensors that limit the maximum current levels.
Overall, the VND600PE is an ideal power management IC for applications requiring multiple load circuits or high current levels. Thanks to its power distribution switch and integrated load drivers, the VND600PE is able to provide accurate power transfers and regulate power draw between different components. With a wide range of adjustable voltage and current levels, the VND600PE is sure to meet the needs of any circuit requiring efficient power management.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
VND600PEP-E | STMicroelect... | 1.34 $ | 1000 | IC DRIVER HIGH SIDE 2CH P... |
VND600PEPTR-E | STMicroelect... | -- | 3000 | IC DRIVER HIGH SIDE 2CH P... |
VND600-E | STMicroelect... | -- | 1000 | IC DVR HIGH SIDE 2CH 25A ... |
VND600PTR-E | STMicroelect... | -- | 1000 | IC DVR HIGH SIDE 2CH POWE... |
VND600P-E | STMicroelect... | -- | 1000 | IC DVR HIGH SIDE 2CH 16SO |
VND600SPTR-E | STMicroelect... | -- | 0 | IC DRIVER HIGH SIDE 2CH P... |
VND600SP-E | STMicroelect... | 2.16 $ | 1000 | IC DRIVER DUAL 36V 25A PW... |
VND600SP | STMicroelect... | -- | 1000 | IC DRIVER DUAL 36V 25A PW... |
VND600SP13TR | STMicroelect... | -- | 1000 | RELAY SSR 2CH 36V POWERSO... |
VND670SP | STMicroelect... | 0.0 $ | 1000 | IC SWITCH DUAL HISIDE POW... |
VND670SP13TR | STMicroelect... | 0.0 $ | 1000 | IC SWITCH DUAL HISIDE POW... |
VND600 | STMicroelect... | 0.0 $ | 1000 | RELAY SSR 2CHAN HI SIDE 1... |
VND60013TR | STMicroelect... | -- | 1000 | RELAY SSR 2CHAN HI SIDE 1... |
VND600TR-E | STMicroelect... | 0.0 $ | 1000 | RELAY SSR 2CHAN HI SIDE 1... |
EXPRESS CARD PWR SWITCH
PSC LOAD SWITCH V-DFN3030-10
IC DARL DRIVER ARRAY 4CH
IC USB POWER SWITCH 8MSOP
IC SW IPS 1CH HIGH SIDE D2PAK-5
IC SW IPS 1CH HIGH SIDE 8SOIC