Allicdata Part #: | 497-2711-5-ND |
Manufacturer Part#: |
VND600SP |
Price: | $ 0.00 |
Product Category: | Integrated Circuits (ICs) |
Manufacturer: | STMicroelectronics |
Short Description: | IC DRIVER DUAL 36V 25A PWRSO-10 |
More Detail: | N/A |
DataSheet: | VND600SP Datasheet/PDF |
Quantity: | 1000 |
Voltage - Supply (Vcc/Vdd): | Not Required |
Base Part Number: | VND600 |
Supplier Device Package: | 10-PowerSO |
Package / Case: | PowerSO-10 Exposed Bottom Pad |
Operating Temperature: | -40°C ~ 150°C (TJ) |
Fault Protection: | Current Limiting (Fixed), Over Temperature, Over Voltage |
Features: | -- |
Input Type: | Non-Inverting |
Rds On (Typ): | 30 mOhm (Max) |
Current - Output (Max): | 25A |
Series: | -- |
Voltage - Load: | 5.5 V ~ 36 V |
Interface: | On/Off |
Output Type: | N-Channel |
Output Configuration: | High Side |
Ratio - Input:Output: | 1:1 |
Number of Outputs: | 2 |
Switch Type: | General Purpose |
Part Status: | Obsolete |
Packaging: | Tube |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
PMICs or Power Management Integrated Circuits are vital components in the electrical and electronics industry. They help to regulate the power supply and distribution of electronic circuits, as well as their switching operations, and control the power by managing various power states in the circuit, thus extending its lifespan and increasing its performance.
VND600SP is an advanced power distribution switchload driver IC. It basically contains an array of switches, which can be used to control the flow of power or current under a variety of conditions. This was specifically designed with a view to reduce the system cost and its size.
The VND600SP is a next-generation power control IC from VND. It features a parameterized switched-mode power supply (SMP) and load switch drivers for managing power flow in its associated circuits. The power distribution switchload driver IC provides high efficiency with a forward-current rating of up to 10A in integration.
The VND600SP has three parts that are placed in a 16-lead mini PLCC package. The three parts are the power switch which is very important to the functioning of the chip and then the two locks which control the source and drain side of the power switch. This IC utilizes low on-state resistance (RDS) and high switching speed to ensure maximum efficiency.
The device is powered by a DC voltage source along with a voltage boost converter in order to achieve optimal output current. The device is designed with a load switch, which ensures reliable performance for devices connected to the load. To prevent short circuit damage, the device is equipped with a fast over-current and short-circuit current limiting capability.
The VND600SP uses an RDS on-state resistance technology that allows the device to be very efficient. It has an adjustable voltage range and an internal startup protection circuit which can monitor the voltage and set the initial voltage overshoot threshold. The device is also equipped with an under-voltage protection circuit which can be used to prevent operation below the lower limit.
The device also implements a slew-rate control to control the output current switch-on time and its corresponding output voltage. It has an adjustable current source that can provide an alternative source of power if the primary power source is lost. This feature allows the device to remain operational even in the case of a power outage.
The IC also features a number of interface and diagnostics options to give users the flexibility to run any test sequence when integrating the IC into their systems. A pin compatible with its predecessor, the VND600SP is also designed to withstand harsh operational environments.
In conclusion, the VND600SP is an extremely useful device that can handle the task of power control that its predecessor does, but in a much more integrated and efficient form factor. With its integrated features such as low RDS on-state resistance, voltage boost converter, adjustable current source and slew rate control, as well as its interface and diagnostics options, the VND600SP is a great addition to any system designer\'s breadboard.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
VND600PEP-E | STMicroelect... | 1.34 $ | 1000 | IC DRIVER HIGH SIDE 2CH P... |
VND600PEPTR-E | STMicroelect... | -- | 3000 | IC DRIVER HIGH SIDE 2CH P... |
VND600-E | STMicroelect... | -- | 1000 | IC DVR HIGH SIDE 2CH 25A ... |
VND600PTR-E | STMicroelect... | -- | 1000 | IC DVR HIGH SIDE 2CH POWE... |
VND600P-E | STMicroelect... | -- | 1000 | IC DVR HIGH SIDE 2CH 16SO |
VND600SPTR-E | STMicroelect... | -- | 0 | IC DRIVER HIGH SIDE 2CH P... |
VND600SP-E | STMicroelect... | 2.16 $ | 1000 | IC DRIVER DUAL 36V 25A PW... |
VND600SP | STMicroelect... | -- | 1000 | IC DRIVER DUAL 36V 25A PW... |
VND600SP13TR | STMicroelect... | -- | 1000 | RELAY SSR 2CH 36V POWERSO... |
VND670SP | STMicroelect... | 0.0 $ | 1000 | IC SWITCH DUAL HISIDE POW... |
VND670SP13TR | STMicroelect... | 0.0 $ | 1000 | IC SWITCH DUAL HISIDE POW... |
VND600 | STMicroelect... | 0.0 $ | 1000 | RELAY SSR 2CHAN HI SIDE 1... |
VND60013TR | STMicroelect... | -- | 1000 | RELAY SSR 2CHAN HI SIDE 1... |
VND600TR-E | STMicroelect... | 0.0 $ | 1000 | RELAY SSR 2CHAN HI SIDE 1... |
EXPRESS CARD PWR SWITCH
PSC LOAD SWITCH V-DFN3030-10
IC DARL DRIVER ARRAY 4CH
IC USB POWER SWITCH 8MSOP
IC SW IPS 1CH HIGH SIDE D2PAK-5
IC SW IPS 1CH HIGH SIDE 8SOIC