VO3053-X007T Isolators

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators are electrical components used to provide galvanic isolation between the input and output of an electrical signal. The VO3053-X007T is a two-channel optoisolator that uses a light-emitting diode (LED) and photo-transistor to achieve electrical isolation. It is a Triac, SCR Output, optoisolator specifically designed for motor control applications.

The VO3053-X007T optoisolator is a 4-pin device that includes the LED and photo-transistor in one package. It has an overvoltage protection of up to 40Vrms making it suitable for a wide variety of industrial motor control applications. The distance between the LED and the photo-transistor is 2mm, providing reliable isolation. The device has a maximum current between the LED and photo-transistor of 1A.

The VO3053-X007T has two important operating modes: open-collector output and zero-cross detection. The open-collector output mode is designed to provide a high level of protection from the motor by automatically disconnecting it in the event of an overload. This feature is especially useful in applications where the motor needs to be shut down in a safe manner. The zero-cross detection mode is used to detect when the load voltage is at a minimum or zero point, allowing the motor to start at the correct time.

In terms of its working principle, the VO3053-X007T optoisolator begins when a small current is applied to the LED, causing it to emit light at a very specific frequency. This light is received by the photo-transistor, which is then triggered to switch its electrical state. The result is a voltage cycling between high and low. The time it takes for this voltage cycle is dependent on the amount of current supplied to the LED.

The VO3053-X007T is an ideal device for motor control applications. It\'s small size, low power requirements, and high overvoltage protection make it a great choice for these applications. In addition, its easy installation and reliable insulation make it an excellent choice for any industrial motor control system.

The specific data is subject to PDF, and the above content is for reference