VO4256H-X006

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Optoisolators have been around for many years and have been used in various applications. VO4256H-X006 is a triac and SCR output optoisolator in the same package. It is manufactured by STMicroelectronics and is used for implementing analog-to-digital (A/D) signal conversion, isolated current sensing, signal isolation, and several other applications.

The optoisolator is composed of two separate electrical components – the optocoupler chip and the optoisolator module. The optocoupler chip is composed of an LED and a phototransistor which are linked together by an optically-driven insulating current barrier. The optoisolator module then isolates the LED and phototransistor from all external electrical noise and spikes. The LED is typically externally powered and the phototransistor is designed to collect current in response to the light emitted from the LED. The collected current is then used to control the triac or SCR output.

The VO4256H-X006 is a high-speed, low-input current optoisolator with a 3-30V operating range. It is an 8-pin optoisolator with 4 dedicated pins for the LED and phototransistor pair, 4 pins for the output electrical contacts, and true DC isolation up to 5kV. It requires an operating current of only 600␣µA, making it ideal for use in battery-powered applications. In addition, it has a high pulse repetition rate of up to 1MHz, allowing it to be used in applications that require fast signal conversions and isolated current sensing.

The VO4256H-X006 has a wide variety of applications, including analog-to-digital conversion, isolated current sensing, signal isolation, power line carrier systems, security systems, telecommunication systems, and numerous other systems. In terms of analog-to-digital conversion, the optoisolator is responsible for converting an analog signal into a digital equivalent. This digital signal can then be used to trigger a microprocessor or other digital controller to take action. The output of the VO4256H-X006 can also be used to drive an external relay for remote control or a motor for controlling a device.

In terms of isolated current sensing, the optoisolator is used for isolated measurement of a current or voltage. This allows for the use of two different ground references (or floating grounds) so that the current or voltage being sensed is free of noise and error. This allows for more precise and accurate readings in applications such as over-current protection and motor control. The use of an optoisolator for signal isolation can also help to minimize errors due to external noise and transients, providing a more robust system.

The VO4256H-X006 is a versatile optoisolator that offers a wide variety of applications. It is well suited for use in A/D signal conversion, isolated current sensing, signal isolation, and other applications. With its low current consumption and high pulse repetition rate, it can be used in both battery-powered applications and more robust applications with higher requirements.

The specific data is subject to PDF, and the above content is for reference