Allicdata Part #: | WBR60-150A-ND |
Manufacturer Part#: |
WBR60-150A |
Price: | $ 3.76 |
Product Category: | Capacitors |
Manufacturer: | Cornell Dubilier Electronics (CDE) |
Short Description: | CAP ALUM 60UF 150V AXIAL |
More Detail: | 60µF 150V Aluminum Electrolytic Capacitors Axial, ... |
DataSheet: | WBR60-150A Datasheet/PDF |
Quantity: | 1000 |
Moisture Sensitivity Level (MSL): | 1 (Unlimited) |
Lead Free Status / RoHS Status: | Lead free / RoHS Compliant |
300 +: | $ 3.41334 |
Polarization: | Polar |
Package / Case: | Axial, Can |
Mounting Type: | Through Hole |
Surface Mount Land Size: | -- |
Height - Seated (Max): | -- |
Size / Dimension: | 0.650" Dia x 1.570" L (16.51mm x 39.88mm) |
Lead Spacing: | -- |
Ripple Current @ High Frequency: | 156mA @ 100kHz |
Ripple Current @ Low Frequency: | 130mA @ 120Hz |
Applications: | General Purpose |
Ratings: | -- |
Series: | WBR |
Operating Temperature: | -40°C ~ 85°C |
Lifetime @ Temp.: | 2000 Hrs @ 85°C |
ESR (Equivalent Series Resistance): | 5.2 Ohm @ 120Hz |
Voltage - Rated: | 150V |
Tolerance: | -10%, +100% |
Capacitance: | 60µF |
Moisture Sensitivity Level (MSL): | -- |
Part Status: | Active |
Lead Free Status / RoHS Status: | -- |
Packaging: | Bulk |
Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us: sales@allicdata.com
Aluminum Electrolytic Capacitors
The WBR60-150A is a type of aluminum electrolytic capacitor. It is a small, compact device that acts as an energy storage element, providing a safe and reliable source of energy for a variety of applications. In its simplest form, a capacitor works by storing energy in an electric field between two conductive plates. The energy that is stored is then available for use when required.
Application Field
The WBR60-150A is primarily used as an energy storage element in automotive, telecommunications, and instrumentation systems. In automotive applications, the device is used to provide extra power when the engine is started, as well as “smoothing” out power fluctuations due to varying engine load. This helps to reduce engine noise and improve fuel efficiency. In telecommunications and instrumentation, it is also used to smoothen out power fluctuations and provide a reliable source of voltage to delicate circuitry.
Working Principle
The working principle of the WBR60-150A is based on the Faraday law of induction. This law states that when a magnetic field is applied to a conductor, a resulting electrical current will flow. Based on this principle, electric current is stored in the capacitor between two conductive plates, with the electric field being determined by the capacitor’s capacitance, and the amount of charge stored is determined by the voltage applied to the capacitor.
Since the WBR60-150A is an aluminum electrolytic capacitor, it can store more energy than a non-electrolytic capacitor due to its specialized construction. The device incorporates two metallic plates, which are then covered in an electrically conductive layer of electrolytic material. This layer ensures that electric current is confined and that the maximum amount of energy is stored.
The WBR60-150A is mainly used in applications where a reliable source of energy is required. This can be in automotive systems, where it is used to provide extra power during start-up, as well as in telecommunications and instrumentation systems. In both cases, the device helps to provide a safe and reliable energy solution.
The specific data is subject to PDF, and the above content is for reference
Part Number | Manufacturer | Price | Quantity | Description |
---|
WBR60-250A | Cornell Dubi... | 5.08 $ | 1000 | CAP ALUM 60UF 250V AXIAL6... |
WBR60-150A | Cornell Dubi... | 3.76 $ | 1000 | CAP ALUM 60UF 150V AXIAL6... |
CAP ALUM 33UF SMD33F 400V Aluminum Elect...
CAP ALUM 33UF SMD33F 400V Aluminum Elect...
CAP ALUM 68UF SMD68F 250V Aluminum Elect...
CAP ALUM 68UF SMD68F 250V Aluminum Elect...
CAP ALUM 100UF SMD100F 200V Aluminum Ele...
CAP ALUM 100UF SMD100F 200V Aluminum Ele...