X0205MA 2BL2

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors - SCRs

A silicon-controlled rectifier (SCR) is an electronic component used as a type of switch. It is the acronym of Silicon Controlled Rectifier and is used frequently in many areas of application. SCR\'s are employed in a wide range of commercial and industrial applications for controlling and regulating the flow of current in a circuit. They are used in a number of systems, ranging from basic switching applications to solar photovoltaic inverters.

The 2BL2 series from X0205MA is a family of silicon-controlled rectifiers/switching diodes for use in high-power applications. They are intended for use in equipment such as lighting, heating, motor starters and switching power supplies. This family provides a broad selection of kit packages and construction, which allows a wide range of applications and design flexibility. The design of these devices is based on a 10A current rating and 600V peak repetitive reverse voltage.

Working Principle

The SCR is a type of semiconductor device, similar in structure to a Diode. It is a four-layered device, with four regions: N-type, P-type, P-type, and N-type. The central junction is called the gate, and the two other junctions are referred to as the anode and cathode, respectively. The working principle of SCRs is based on three regions of conduction. In the absence of a gate signal, all three regions are held in a blocking lower state.

When a positive signal is applied at the gate, electrons are injected into the N-type layer, creating a high resistance between the second P-type layer and the N-type layer. This creates an SCR that is in its OFF state, as the two junctions are not allowing electrons to pass through. In order to turn the SCR on, a negative gate signal must be applied to reverse the effect of the positive gate signal. This causes the two junctions to conduct current and the three regions to enter a conducting state.

Applications

The 2BL2 series from X0205MA are suitable for use in the following applications:

• Lighting dimmers
• Switching power supplies
• Motor starter/inverter circuits
• Industrial control systems
• PLC systems
• Heater controllers

These SCRs are also primarily used in high-current applications due to their ability to handle large amounts of current. For example, they can be used to control the speed of electric motors or to regulate the flow of current in large solar photovoltaic inverter systems.

The 2BL2 series is also ideal for applications where noise and switching speed are critical factors. These SCRs are designed to switch signals quickly with no unwanted switching noise. This makes them well-suited for sensitive applications such as medical diagnostics or communication systems.

The 2BL2 series also provide good resistance to thermal overload and are suitable for use in high-frequency applications due to their higher switching frequency capabilities. In addition, the low forward voltage drop of these devices makes them well suited for applications operating from low-voltage DC power sources.

Conclusion

The X0205MA 2BL2 series is a range of silicon-controlled rectifiers/switching diodes intended for use in high-power applications. These SCRs are capable of handling large amounts of current, as well as switching signals quickly with no unwanted noise. The low forward voltage drop of these devices makes them suitable for use in low-voltage DC power sources. The 2BL2 series are suitable for use in a wide range of commercial and industrial applications, ranging from basic switching applications to solar photovoltaic inverters.

The specific data is subject to PDF, and the above content is for reference