XC18V04PCG44C

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

An integrated circuit, or IC, is a small chip containing a dedicated processor and other components. XC18V04PCG44C is an Erasable Programmable Read-Only Memory, more commonly known as an EPROM. It is primarily used for field application and configuration of FPGAs.

EPROM stands for Erasable Programmable Read-Only Memory. It is a type of non-volatile memory chip that can be erased by ultraviolet light and then programmed with new data. This makes it the ideal choice for field programming FPGAs, as it can save FPGA configurations in the chip and allow the user to change configurations quickly, without the need of programming the FPGA directly.

The XC18V04PCG44C EPROM is an 8K x 18 bit device which operates on a 3.3V voltage supply. It is an advanced flash memory device and has several features that separate it from other EPROMs. It offers fast program/erase speeds, low power consumption and superior data retention through its ‘Soft Exclusive Or’ algorithm. The patented SECTOR architecture that the XC18V04PCG44C EPROM utilizes, makes the data completely independent, so that the user can customize the configuration of the FPGA without the worry of unintentionally overwriting data.

When using the XC18V04PCG44C with an FPGA, the programmable logic is configured by the data stored in the EPROM. This data is referred to as configuration data, and is usually supplied to the chip through a two-wire serial interface. The serial interface allows the chip to program the FPGA with the desired configuration data and also allow any configuration data changes that may be necessary in the future.

The working principle of the XC18V04PCG44C is quite simple. First, data is supplied from the two-wire serial interface and the configuration data is stored in the EPROM chip. Once the configuration data is stored in the chip, the address lines of the EPROM are used to select a register in the FPGA. Then, the configuration data in the EPROM is shifted out and is used to configure the logic elements on the FPGA.

The XC18V04PCG44C EPROM is a great choice for field application and configuration of FPGAs. It offers fast program and erase speeds, low power consumption and superior data retention, with its patented ‘Soft Exclusive Or’ algorithm. With its two-wire serial interface, the chip can program the FPGA with the desired configuration data and also allow any configuration data changes that may be needed in the future.

The specific data is subject to PDF, and the above content is for reference