Z0405MF0AA2

Series:	--
Packaging:	Tube
Part Status:	Active
Triac Type:	Logic - Sensitive Gate
Voltage - Off State:	600V
Current - On State (It (RMS)) (Max):	4A
Voltage - Gate Trigger (Vgt) (Max):	1.3V
Current - Non Rep. Surge 50, 60Hz (Itsm):	20A, 21A
Current - Gate Trigger (Igt) (Max):	5mA
Current - Hold (Ih) (Max):	5mA
Configuration:	Single
Operating Temperature:	-40°C ~ 125°C (TJ)
Mounting Type:	Through Hole
Package / Case:	TO-202-3
Supplier Device Package:	TO-202-3

Due to market price fluctuations, if you need to purchase or consult the price. You can contact us or emial to us:   sales@allicdata.com

Thyristors, sometimes referred to as TRIACs, are electrical switches that are used to turn an electrical device on and off. The Z0405MF0AA2 is a popular thyristor used in a variety of applications. In this article, we will look at the Z0405MF0AA2’s applications and how it works.ApplicationsThe Z0405MF0AA2 is used in many applications, including:-Industrial and Commercial Refrigerators and Freezers: The Z0405MF0AA2 is used as a control for powering the compressor, evaporator, and condenser fans.-Solar Energy Conversion: The Z0405MF0AA2 is used in solar energy conversion systems to convert DC energy into AC energy, allowing it to be used with conventional appliances and power grids.-Heating and Lighting Control: The Z0405MF0AA2 is used to control heating and lighting systems in commercial and residential settings.-Power Supplies: The Z0405MF0AA2 is used in power supplies to provide circuit isolation and protection against overvoltage and transients.-Electrolysis: The Z0405MF0AA2 is used as a switching device in electrolysis applications.Working PrincipleThe Z0405MF0AA2 is a 4-pin thyristor device that is triggered by an external electrical signal. When the device is triggered, it changes from a non-conductive state (OFF) to a conductive state (ON), allowing current to pass through it.When the thyristor is ON, it can be used for both AC and DC applications. In AC applications, it is used as an AC switch, allowing current to be switched between two different points in the circuit. In DC applications, the thyristor is used to control the flow of current in the circuit.The Z0405MF0AA2 is also able to control the speed of motors and other electromechanical devices by varying the frequency of the electrical signal that is used to trigger it. This is done by varying the delay between the leading and trailing edges of the incoming signal.ConclusionThe Z0405MF0AA2 is a popular thyristor that has many uses in industrial and commercial applications. It is used as an AC and DC switching device, a heater and lighting control, and a motor speed controller. Its main purpose is to control the flow of current in a circuit, allowing it to be used in a variety of applications.

The specific data is subject to PDF, and the above content is for reference

Part Number	Manufacturer	Price	Quantity	Description